Manual Husqvarna Designer SE - Limited Edition (page 13 of 100) (English)

609910

Zoom out

Zoom in

1/100

1-13

Set it Up

Threading for Twin Needle

1. Insert a twin needle. See page 1-20 “Changing the

needle”.

2. Use a second thread spool or wind a bobbin with

the thread you are going to use as the second

upper thread.

LEFT NEEDLE (RED): Thread the machine as

explained on page 1-11 (Horizontal spool pin) and

check to ensure that the thread lies between the

inner thread tension discs (d) and inside the last

thread guide. Thread the left needle.

RIGHT NEEDLE (GREEN): Pull out the auxiliary

spool pin and place your second thread spool on

the spool pin. Place a spool holder in front of the

spool.

5. Thread the machine as before, but this thread

should lie between the outer thread tension discs

(d) and outside the last thread guide. Thread the

right needle.

Bobbin Winding

Make sure that the presser foot and the needle are in

the up position.

1. Place an empty bobbin on the bobbin spindle at

the front of the machine (the markafacing up).

Use only the original HUSQVARNA VIKING®

green bobbins.

2. Thread the machine with the main spool pin in

horizontal position.

NOTE: If the thread spool is too large to be in

horizontal position, wind the bobbin as described

under “Winding Specialty Threads”, page 1-14.

3. Bring the thread up from the needle, under the

presser foot and to the right through thread guide

(b).

Only use a metal presser foot when bob bin winding from

the needle.

4. From above, wind a few turns of thread clockwise

around the bobbin and into the thread cutter (c).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer SE - Limited Edition in the language / languages: English as an attachment in your email.

The manual is 6,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer SE - Limited Edition

Husqvarna Designer SE - Limited Edition User Manual - German - 100 pages

Husqvarna Designer SE - Limited Edition User Manual - Dutch - 100 pages

Husqvarna Designer SE - Limited Edition User Manual - French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna Designer SE - Limited Edition Manual

Product: