685908
42
Zoom out
Zoom in
Previous page
1/52
Next page
42 hunter.direct/ACC2help
STATION LIMITS
Dial to Stations, Station Limits to review or change the
number of stations that are allowed to run at once.
It is not necessary to change Station Limits for Flow Manager
to operate, but it is possible. These settings can be used to
customize the results of ow management.
Maximum Simultaneous Stations sets a hard limit on the
number of stations the controller can run at once, regardless
of Flow Manager or other settings. The ACC2 conventionally-
wired controller can run approximately 14 Hunter solenoids
at once, including P/MV outputs. The maximum number of
solenoids may vary to other factors.
Enter a Controller number that meets your needs if the
default of 10 is not desirable.
If Flow Manager is enabled, a maximum number of
simultaneous stations per program can also be entered. This
can be useful to force the controller to spread irrigation across
multiple programs.
Example: Program 1 runs turf zones, and Program 2 runs
Shrub zones. If they are both part of the same ow managed
Flow Zone, and you know the Flow Zone can run about 6
zones at once, you could set a limit of “3” on Program 1 and
“3” on Program 2. The controller will still ow manage to
your target ow, but could only run 3 in either program to get
there.
If the Flow Target rates are well below the rates that the
Controller and Program station limits would allow, the station
limits will never be reached. The controller will decide which
stations to run, and in what order.
MAINSAFE™
A MainSafe is an optional level of ow monitoring and
protection above the Flow Zone level. It is especially useful
when:
More than one Flow Zone has been congured from the
same water supply.
When there is a long distance between the point of
connection and the beginning of the actual Flow Zone(s).
When separate mainlines are in a constantly charged state
for the sole purpose of manual watering.
MainSafe zones generally require their own ow sensor,
and their own Master Valve. Oen these are Normally Open
Master Valves, which only close in the event of an alarm.
To set up a MainSafe, dial to the Flow menu, and select
MainSafe.
Flow Operations
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hunter ACC-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hunter ACC-2 in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hunter ACC-2

Hunter ACC-2 Quick start guide - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info