685908
43
Zoom out
Zoom in
Previous page
1/52
Next page
Built on Innovation
®
43
SETUP SCREEN
Press the so key for Setup.
This allows the MainSafe to be named (recommended).
Check the box to enable Monitor Flow.
Assign the P/MV output and Flow Sensor that are assigned to
the MainSafe.
The Flow Zones check marks and X’s cannot be set here. They
show the relationship of this MainSafe to the Flow Zones.
These are assigned in the Flow Zones menu, Flow Map screen.
FLOW LIMITS SCREEN
Press the so key for Flow Limits.
MAXIMUM FLOW
Maximum Flow is an absolute high limit for all ow from the
MainSafe level (the water source). If the ow rate exceeds that
amount, irrigation will be shut down. It does not matter what
stations are running or what the learned ow is.
This should be considerably larger than the maximum ow
allowed in normal irrigation in all downstream Flow Zones
(so that it does not alarm before station-level and Flow Zone
diagnostics can be performed).
UNSCHEDULED FLOW
Unscheduled Flow is any ow that is detected by the ow
sensor when no stations are running. A ow rate can be
entered here to permit manual watering up to the specied
amount, without causing an alarm or shutting o the water. If
unscheduled ow is detected over that amount, an alarm will
occur.
ALARM DELAY
High ows will alarm immediately if this is set to None, or
they will be ignored until they have lasted as long as the
time entered here. Set in M:SS format; the longest delay is
9 minutes, 59 seconds. This can eliminate false alarms from
temporary surges in ow.
ALARM CLEAR DELAY
Sets the amount of time a MainSafe zone will remain shut
down before allowing new automatic irrigation attempts. Set
in HH:MM format, the longest delay setting is 23 hours, 59
minutes.
If Alarm Clear Delay is set to Manual Only, automatic
irrigation will never resume aer a high ow or unscheduled
ow alarm, until it is manually cleared by an operator at the
controller. The operator must dial to the Flow menu, select
Clear Flow Alarms, the Flow Alarms that should be cleared,
and click Clear Selected.
Flow Operations
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hunter ACC-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hunter ACC-2 in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hunter ACC-2

Hunter ACC-2 Quick start guide - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info