604914

Humax DTR-T2000 YouView Manual

23
Zoom out
Zoom in
Previous page
1/31
Next page
Settings: Device Management
Auto delete recordings
By default, your YouView+ box is set to
delete old recordings automatically when
the hard disk runs out of space. However,
to prevent this, use the arrow keys to
change the setting from ON to OFF.
Delete recordings
confirmation
This option is defaulted to OFF. When
activated, you will be asked to confirm
that you want to delete a recording. This is
designed to avoid accidental deletions.
Software update
YouView will use the internet to
automatically update your software
overnight if the box is left in standby.
However, you can use this setting to
check for updates manually.
Update On
Demand players
Update checks are performed automatically.
However, you can do them yourself by
selecting Check Now.
Reset your YouView+ box
Use this option if you want to reset
your box and restore its factory settings.
However, please bear in mind that doing so
will reset your PIN, remove your preferences,
delete your postcode, all your recordings
and reminders.
Automatic standby
This option controls when your YouView+
box goes into standby mode. By default,
it will do so after 3 hours if you have not
used it. To change the setting, press OK on
Automatic Standby Time and use the arrow
keys to select one of the available options: 2,
3, 4 or 12 hours.
Eco mode
Use this option to manage the box’s energy
settings. By default this is set to HIGH, the
greenest mode. By changing it to LOW, your
YouView+ box will go into active standby,
which is less energy efficient but will reduce
start-up times.
RF loop through
If you wish to supply your aerial signal to
another TV, use this option to enable the
Antenna Out connection on your YouView+
box. By default, this is set to OFF.
Mobile Devices
Use this setting to pair your mobile device
to your YouView+ box to enable remote
recording from the YouView app. To pair
your device select Connect Device on the
YouView+ box and enter the connection code
in the app. You will then have 2 minutes to
enter the 8-digit code displayed on your
TV screen. You can connect a maxium of 5
devices to each box.
You can unpair by uninstalling the app
or removing the data from your mobile.
Alternatively, you can do so via Settings to
automatically unpair your app the next time
you try to use it to set a recording. This can
take up to 15 minutes. After that time, if you
restart the app or try to use it to record, you
will be prompted to pair your device with
the box.
Use the Device Management settings to customise your YouView
experience and to check that your box is up to date.
22
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humax DTR-T2000 YouView at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humax DTR-T2000 YouView in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info