617384

HP PSC 2400 Photosmart Series Manual

156
Zoom out
Zoom in
Previous page
1/166
Next page
hp psc 2400 series
chapter 15
146
troubleshooting
I have difficulties
when sending faxes
and when receiving
faxes
(continued)
• Using a telephone line splitter might cause faxing problems. Try
removing the splitter and connecting the HP PSC directly to the
telephone wall jack.
• Check that the telephone wall jack has a working telephone line by
plugging in a phone and checking for a dial tone.
• Telephone lines with poor sound quality (noise) can cause faxing
problems. Check the sound quality of the telephone line by
plugging a phone into the wall jack and listening for static or other
noise. If you hear noise, turn off the Error Correction Mode (ECM)
feature on your HP PSC and try faxing again. For information, see
use error correction mode (ECM) on page 68. Also contact your
phone company to report the noise problem on your line.
• Other equipment using the same telephone line as the HP PSC
might be in use. For example, you cannot use your HP PSC for
faxing if an extension phone is off-hook, or if you are using your
PC modem to e-mail or access the Internet.
• If you are using a digital subscribe line (DSL), make sure that you
have a DSL filter connected or you will not be able to fax
successfully. Obtain a DSL filter from your DSL provider. The DSL
filter removes the digital signal that blocks your HP PSC from
communicating properly with the telephone line. For information
on how to connect the DSL filter, see faxing from a DSL line on
page 130.
• Check for error messages on the front panel of your HP PSC. Until
a product error condition is resolved, you will not be able to send
or receive faxes. For information on resolving error conditions, see
the Error Messages section of the hp psc 2400/2500 series
troubleshooting section in the onscreen hp photo & imaging help.
• If you are using either a PBX or an ISDN converter, make sure the
HP PSC is connected to the port that is designated for fax and
phone use.
Note that some ISDN systems allow you to configure the ports for
specific phone equipment; for example, you might have assigned
one port for telephone and Group 3 fax and another for multiple
purposes. If you continue to have problems when connected to the
fax/phone port, try using the port designated for multiple purposes
(might be labeled “multi-combi” or something similar).
I cannot receive
faxes, but I can send
faxes
• The Rings to Answer feature might not be set to answer after the
appropriate number of rings for your office setup. For more
information, see how to choose the right fax setup for your office
on page 116.
• If you have a voicemail service at the same phone number you use
for fax calls, you must receive faxes manually, not automatically.
For information on setting up for faxing when you have a voicemail
service, see fax setup on page 115. For information on how to
receive faxes manually, see set up your hp psc to answer fax calls
manually on page 60.
problem possible cause and solution
… 156 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP PSC 2400 Photosmart Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP PSC 2400 Photosmart Series in the language / languages: English as an attachment in your email.

The manual is 6,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP PSC 2400 Photosmart Series

HP PSC 2400 Photosmart Series User Manual - German - 180 pages

HP PSC 2400 Photosmart Series User Manual - Dutch - 182 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info