617384

HP PSC 2400 Photosmart Series Manual

158
Zoom out
Zoom in
Previous page
1/166
Next page
hp psc 2400 series
chapter 15
148
troubleshooting
I cannot receive
faxes, but I can send
faxes
(continued)
• If your HP PSC shares the same phone line with other types of
phone equipment—such as an answering machine or a PC
modem—the fax signal level might be reduced, causing fax
reception problems.
To find out if other equipment is causing a problem, disconnect
everything except the HP PSC from the phone line, and then try to
receive a fax. If fax reception is successful without the equipment,
then one or more pieces of the equipment is causing problems; try
adding them back one at a time and faxing, until you identify
which equipment is causing the problem.
I cannot send faxes,
but I can receive
faxes
• If you are using speed dial to dial the fax number, the HP PSC
might be dialing too fast or too soon. Try re-creating the speed dial
entry and inserting some pauses. For information, see create speed-
dial entries on page 64.
• If your telephone line has a PBX system, make sure you are dialing
the number for an outside line before dialing the fax number.
• The receiving fax machine might be having problems. To check
this, try calling the fax number from a telephone and listen for fax
tones. If you cannot hear fax tones, the receiving fax might not be
turned on or connected, or a voicemail service could be interfering
with the recipient’s phone line.
Fax tones are
recorded on my
answering machine
• When you have an answering machine on the same phone line
you use for fax calls, you must connect the answering machine
directly to the HP PSC (or through a directly-connected PC modem,
if applicable) as described in fax setup on page 115. If you do not
connect it as recommended, fax tones might be recorded on your
answering machine.
I hear static on my
telephone line ever
since I connected the
HP PSC
• If you did not connect the HP PSC from the port labeled “1-LINE” to
your telephone wall jack using the phone cord supplied in the box
with your HP PSC, you might hear static on your phone line and
you might not be able to fax successfully.* This special 2-wire cord
is different from the more common 4-wire cords you might already
have in your office. For more information, see I have difficulties
when sending faxes and when receiving faxes on page 145.
* This possible cause/solution applies only in the countries/regions that
receive a 2-wire phone cord in the box with the
HP PSC, including:
Argentina, Australia, Brazil, Canada, Chile, China, Colombia, Greece,
India, Indonesia, Ireland, Japan, Korea, Latin America, Malaysia, Mexico,
Philippines, Poland, Portugal, Russia, Saudi Arabia, Singapore, Spain,
Taiwan, Thailand, USA, Venezuela, and Vietnam.
• Using a telephone line splitter might affect the sound quality of
your phone line, causing static. Try removing the splitter and
connecting the HP PSC directly to the telephone wall jack.
problem possible cause and solution
… 158 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP PSC 2400 Photosmart Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP PSC 2400 Photosmart Series in the language / languages: English as an attachment in your email.

The manual is 6,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP PSC 2400 Photosmart Series

HP PSC 2400 Photosmart Series User Manual - German - 180 pages

HP PSC 2400 Photosmart Series User Manual - Dutch - 182 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info