20200
140
Zoom out
Zoom in
Previous page
1/304
Next page
Solving general printing problems
In addition to the issues and solutions that are listed in this section, see Troubleshooting
common Macintosh problems if you are using a Macintosh computer, and see
Troubleshooting common PostScript problems if you are using the PS driver.
Printer selects media from the wrong tray.
Cause
Solution
The tray selection in the software program might
be incorrect.
For many software programs, the paper tray
selection is found on the Page Setup menu
within the program.
Remove any media in other trays to make the
printer select from the correct tray.
For Macintosh computers, use the HP LaserJet
Utility to change the priority of the tray.
The configured size does not match the size of
the media that is loaded in the tray.
Through the control panel, change the
configured size to match the size of the media
that is loaded in the tray.
Printer does not pull paper from tray.
Cause
Solution
The tray is empty. Load paper in the tray.
The paper guides are set incorrectly. To set the guides correctly, see Loading trays.
For the 500-sheet paper tray, make sure that the
leading edge of the paper stack is even. An
uneven edge can prevent the lift plate from rising.
Paper curls when it exits the printer.
Cause
Solution
The paper curls when it exits to the top output bin. Open the rear output bin to allow the paper to
exit in a straight path through the printer.
Turn over the paper that you are printing on.
Reduce the fusing temperature to reduce the
curling. (See
Selecting the correct fuser mode.)
First sheet of media jams in the print-cartridge area.
Cause
Solution
A combination of high humidity and high
temperature is affecting the media.
Adjust the printer for high humidity and high
temperature conditions.
128 Chapter 4 Problem solving ENWW
140


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info