20200
139
Zoom out
Zoom in
Previous page
1/304
Next page
Make sure that you have
selected the correct tray.
(See
Selecting a paper
source.)
Make sure that trays are
correctly configured for
paper size and type. (See
Loading trays.) Print a
configuration page to see
current tray settings. (See
Configuration page.)
Make sure that the tray
selection (Source) or Type
in the printer driver or
program is set correctly.
(The printer driver and
program settings override
the printer control panel
settings.)
By default, paper loaded in
tray 1 will be printed first. If
you do not want to print
from tray 1, remove any
paper loaded in the tray or
change the USE
REQUESTED TRAY
setting. (See
Customizing
tray 1 operation.) Change
TRAY 1 SIZE and TRAY 1
TYPE to a setting other
than ANY.
If you want to print from
tray 1, but cannot select
the tray in a program, see
Customizing tray 1
operation.
Print a configuration page
to verify that the accessory
is installed properly and is
functional. (See
Configuration page.)
Configure the printer driver
to recognize the installed
accessories (including
trays). (See the printer
driver online Help.)
Turn the printer power off,
and then turn the printer
power on.
Verify that you are using
the correct optional
accessory for the printer.
If the duplexer will not
duplex, check that the rear
output bin is closed.
If the duplexer will not
duplex, you might need to
install more memory. (See
Printer memory.)
NOTE
The duplexer is included for
models that have "d" in the
product name. It is optional for
all other models.
If the optional stacker or
stapler/stacker is not
working properly, check
the accessory lights. (See
Accessory lights.)
If the optional stacker or
stapler/stacker is not
working properly, check to
see if a message appears
on the printer control panel
display. (See
Interpreting
control-panel messages.)
If the optional stapler/
stacker is not stapling, but
the accessory light is solid
green, and neither TOO
MANY PAGES IN JOB
nor DIFFERENT PAPER
SIZES IN JOB appears on
the printer control panel
display, call for support.
(See
HP customer care.)
Go to Interpreting control-
panel messages.
ENWW Troubleshooting flowchart 127
139


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info