20200
142
Zoom out
Zoom in
Previous page
1/304
Next page
The printer prints, but the text is wrong, garbled, or incomplete.
Cause
Solution
The printer cable is loose or defective. Disconnect the printer cable and reconnect it.
Try a print job that you know works. If possible,
attach the cable and printer to another computer
and try a print job that you know works. Finally,
try a new cable.
The printer is on a network or sharing device and
is not receiving a clear signal.
Disconnect the printer from the network and use
a parallel or USB cable to attach it directly to a
computer. Print a job that you know works.
The wrong driver was selected in the software. Check the software's printer selection menu to
make sure that an HP LaserJet 4250 or 4350
series printer is selected.
The software program is malfunctioning. Try printing a job from another program.
The printer does not respond when you select Print in the software.
Cause
Solution
The printer is out of media. Add media.
The printer might be in the manual feed mode. Change the printer from manual-feed mode.
The cable between the computer and the printer
is not connected properly.
Disconnect and reconnect the cable.
The printer cable is defective. If possible, attach the cable to another computer
and print a job that you know works. You might
also try using a different cable.
The wrong printer was selected in the software. Check the software printer selection menu to
make sure that an HP LaserJet 4250 or 4350
series printer is selected.
The printer might have a jam. Clear any jams, paying careful attention to the
duplexer area (if your model has a duplexer).
See
Clearing jams.
The software for the printer is not configured for
the printer port.
Check the software's printer selection menu to
make sure that it is using the correct port. If the
computer has more than one port, make sure
that the printer is attached to the correct one.
The printer is on a network and is not receiving a
signal.
Disconnect the printer from the network and use
a parallel or USB cable to attach it directly to a
computer. Reinstall the printing software. Print a
job that you know works.
Clear any stopped jobs from the print queue.
The printer is not receiving power. If no lights are on, check the power cord
connections. Check the power switch. Check the
power source.
130 Chapter 4 Problem solving ENWW
142


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info