20200

HP LASERJET4350 Manual

79
Zoom out
Zoom in
Previous page
1/304
Next page
Printing on paper that has a special finish
Some paper has a special finish, such as laid paper, bond paper, and cockled paper. These
types of paper can cause issues in regard to toner adhesion and print quality. Follow these
guidelines when printing on paper that has a special finish.
● At the printer control panel, open the CONFIGURE DEVICE menu. On the PRINT
QUALITY submenu, select FUSER MODES, and then select the paper type that you are
using (such as BOND). Set the fuser mode to HIGH 1 or HIGH 2. HIGH 2 provides
better toner adhesion and optimal print quality for paper that has a highly textured finish.
Open the PAPER HANDLING menu and set TRAY TYPE to the type of paper that you
are using (such as BOND) to turn on the appropriate fuser mode.
NOTE
The printer might print at a slower speed when set at HIGH 1 or HIGH 2. Use the HIGH 1
and HIGH 2 settings only if you are experiencing toner-adhesion problems. The HIGH 1 and
HIGH 2 settings might increase problems with curl and jams.
● Some makers of these types of paper are now coating one side of the paper to enhance
toner adhesion and print quality. To take advantage of this feature, make sure to load
the paper correctly. The side on which you can read the watermark correctly is the front
side, or the side to be printed on.
For tray 1, load paper with the front side facing up, and the top, short edge toward the printer.
For tray 2, optional 500-sheet trays, and the optional 1,500-sheet tray, load paper with the
front side facing down, and the top, short edge toward you.
ENWW Printing on special media 67
… 79 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info