20200

HP LASERJET4350 Manual

77
Zoom out
Zoom in
Previous page
1/304
Next page
● Do not print on both sides of labels.
● Do not print on sheets from which labels have been removed.
Printing on transparencies
Use only transparencies that are recommended for use in laser printers. For transparency
specifications, see
Transparencies.
● At the printer control panel, open the CONFIGURE DEVICE menu. On the PRINT
QUALITY submenu, select FUSER MODES. Make sure that the fuser mode is set to
TRANSPARENCY=LOW.
CAUTION
Failure to set the fuser mode to LOW can permanently damage the printer and fuser.
● In the printer driver, set the paper type to Transparency.
● At the printer control panel, open the PAPER HANDLING menu. Set the tray type to
TRANSPARENCY for the tray that you are using.
● Load transparencies face up in tray 1 with the top toward the printer. Up to
50 transparencies can be loaded in tray 1. A stack of up to 100 transparencies can be
printed from tray 2 and the optional trays (although stacking more than 50 at a time is
not recommended). Because transparencies are heavier than paper, do not load trays to
maximum capacity. Load them with the side to be printed on facing down, and the top,
short edge toward you.
● To prevent transparencies from becoming too hot or from sticking together, use the top
output bin and remove each transparency from the output bin before printing another.
● Print only on one side of a transparency.
● Place transparencies on a flat surface to cool after removing them from the printer.
● If two or more transparencies feed at the same time, try fanning the stack.
● Do not feed transparencies through the printer more than once.
Printing on letterhead, prepunched, or preprinted paper
(single-sided)
When printing on letterhead, prepunched, or preprinted paper, it is important to orient the
paper correctly. Follow the guidelines in this section for printing on one side only. For
duplexing guidelines, see
Printing on both sides of paper (optional duplexer).
ENWW Printing on special media 65
… 77 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info