20200

HP LASERJET4350 Manual

80
Zoom out
Zoom in
Previous page
1/304
Next page
Printing on small sizes, custom sizes, or heavy paper
Custom-size paper can be printed from tray 1, tray 2, or an optional 500-sheet tray.
NOTE
The printer might print at a slower speed when printing on small sizes, custom sizes, and
heavy paper. For more information about paper that have a special finish, such as laid or
bond paper, see
Printing on paper that has a special finish.
Weight and sizes
See the following table for specifications when printing on custom or heavy paper. For more
information, see
Paper specifications.
Tray Minimum size Maximum size Supported weights
Tray 1 76 x 127 mm
(3 x 5 inches)
216 x 356 mm
(8.5 x 14 inches)
60 to 200 g/m
2
(16 to 53 lb)
Tray 2 and optional
500-sheet tray
148 x 210 mm
(5.8 x 8.2 inches)
216 x 356 mm
(8.5 x 14 inches)
60 to 120 g/m
2
(16 to 32 lb)
Guidelines for heavy paper
Follow these guidelines when printing on heavy paper:
●
Paper heavier than 120 g/m
2
(32 lb) should be printed only from tray 1. To reduce curl
and other problems, print heavy paper from tray 1 to the rear output bin.
● To help prevent toner from rubbing off of the paper, some heavier paper types should be
printed using a higher fuser mode. At the printer control panel, open the CONFIGURE
DEVICE menu. On the PRINT QUALITY submenu, select FUSER MODES, and then
select the media type that you want to modify. Select either HIGH 1 or HIGH 2 as the
fuser mode. Using these modes helps prevent toner from rubbing off the page, but using
them might slow the printer speed or create other problems, such as increased curl.
Guidelines for custom-size paper
Follow these guidelines when printing on any custom-size paper:
● Feed the paper short-edge first.
● In your program, set page margins at least 4.23 mm (0.17 inch) away from the edges.
● Set the custom size in the program, in the printer driver, or at the printer control panel.
Make sure that you set the switch in the tray to Custom. See
Setting custom paper sizes.
68 Chapter 2 Printing tasks ENWW
… 80 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info