436321

HP designjet 8000s cutter blade kit Manual

187
Zoom out
Zoom in
Previous page
1/230
Next page
NOTE For Celsius/Fahrenheit conversions:
F = (9 × C / 5) + 32
C = 5 × (F - 32) / 9
NOTE This value will only be applied if the HEATER PREF option is set to HEAT PANEL.
Color stripe setting (COLOR STRIPE)
A color stripe is printed on all plots. This ensures that all printhead nozzles are used in all prints, even if
the printed image does not include certain colors. The color stripe avoids drying of nozzles even if they are
not used for a long time because they are not needed within your printed images. This option activates or
deactivates printing of the color stripe for the selected media type.
Parameters:
●
OFF — Does not print the color stripe.
●
ON — Prints the color stripe.
NOTE Use of the color stripe will add 40 mm (1.57 in) to your print margin.
NOTE We recommend that you set COLOR STRIPE to ON if possible. If the color stripe is not
printed, this can affect printhead nozzle performance.
The color stripe is printed on the test print even if this option is set to OFF.
Printhead height setting (PH HEIGHT VAL)
Use this option to set the printhead height for the selected media type. Change this setting when you change
the printing carriage height (see How do I… Change the printhead height).
Parameters:
●
NORMAL — Default.
●
HIGH — Set for thick media.
Bidirectional print position adjustment (BIDIR DEF VALUE)
For the selected media type, use this option to adjust the position of all the printheads when using
bidirectional printing for all print modes except FINE and F-FINE.
Enter an adjustment value based on the printhead adjustment pattern print. See
How do I calibrate my
printer.
ENWW The MEDIA REG menu 177
Tell me about… (menus)
… 187 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP designjet 8000s cutter blade kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info