436321

HP designjet 8000s cutter blade kit Manual

189
Zoom out
Zoom in
Previous page
1/230
Next page
lines. Use the BACK ADJUST VAL option to eliminate these lines. Select this mode when using media
that is sensitive to the heater temperature, such as PVC. However, these lines may shift depending on the
media. In such a case, use the START & END or DURING PRINT2 modes.
When DURING PRINT2 is selected, separator lines are generated in the middle of printing path although
cleaning is performed during printing. Select this mode when using media which is not sensitive to the
heater temperature, such as tarpaulin. Separator lines are easier to adjust in this mode than in the DURING
PRINT mode, however, color tone around the lines may be changed. Select the mode according to the
property of the media to be used.
Media back feed adjustment (BACK ADJUST VAL)
This option sets the amount of back feed when printing of an image is interrupted by the automatic cleaning
process.
Set a back feed adjustment value for the media based on the back feed adjustment pattern. See
How do
I calibrate my printer.
Parameters: ±2000 pulses (+5 mm), 1 pulse=2.5 µm
Tip After printing the back feed adjustment pattern, measure the start distance. Try setting the
value at 0005 and reprint the back feed adjustment pattern and re-measure the distance and
modify the value if necessary. Increasing the value will increase the distance.
Media advance preference (ADVANCE PREF)
Use this option to define printer front panel priority or software RIP priority for media advance settings for
the selected media type. If you select software RIP priority, the printer will ignore media advance settings
that are defined on the printer front panel and use the settings from the RIP.
ENWW The MEDIA REG menu 179
Tell me about… (menus)
… 189 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP designjet 8000s cutter blade kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info