436321

HP designjet 8000s cutter blade kit Manual

185
Zoom out
Zoom in
Previous page
1/230
Next page
Leading edge mode (LEADING EDGE)
This option allows you to define how the printer detects the position of the media when it is loaded or to
make media settings on the front panel.
NOTE This setting is not applied when you use the take-up reel.
Parameters:
●
NORMAL — Detects the leading edge of the media when you replace or load the media, and then
completes media loading after checking for skew.
●
REDUCED — Detects the leading edge of the media when you replace or load media, and then
completes media loading after detecting the edge of the media by rewinding.
NOTE The recommended setting is NORMAL. If you select REDUCED, follow these
instructions:
●
Cut the edge of the media so that the edge of the media is parallel to the guide line and then
load the media. If the edge of the media is not straight, the printer will deposit ink on the platen
and that can cause a printhead crash.
●
Load the media after checking that there are no wrinkles on the edge of the media. Wrinkled
media can cause a printhead crash.
●
Load the media after checking that there is no tape or glue on the edge of the media. If using
media with tape or glue, it can cause a media jam.
Vacuum level setting (VACUUM LEVEL)
Use the VACUUM LEVEL option to set the suction force of the vacuum fan on the printing platen for the
selected media type.
Parameters:
●
NORMAL — Normal fan suction level.
●
LOW — Low fan suction level.
Initial temperature setting for the front heater (FRONT HEATER T)
Use this option to set the front heater temperature for the selected media type.
ENWW The MEDIA REG menu 175
Tell me about… (menus)
… 185 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP designjet 8000s cutter blade kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info