436321

HP designjet 8000s cutter blade kit Manual

183
Zoom out
Zoom in
Previous page
1/230
Next page
Parameters:
●
BIDIR — Bidirectional printing gives higher printing speeds with slightly lower image quality.
●
UNIDIR — Unidirectional printing gives lower printing speeds but higher image quality.
Flatten time (FLATTEN TIME)
The printing conditions may affect the media when the printer has not printed for some time, and print quality
may be affected by wrinkles or smudges on the edge of the media due to humidity and dust. For example,
if you print using a higher heater temperature, this may cause wrinkling, so you can set a lower time to
maintain the media in optimal condition. The FLATTEN MEDIA option automatically feeds and rewinds the
media before printing starts.
If no data is received and the set time limit is reached, then the edge of the media roll is fed through the
media path to the rear cover automatically. If the leading edge of the media roll is already present at the
rear cover, the procedure is not performed.
The printer performs the procedure automatically when it is turned off; the edge of the media roll is fed
through the media path to the rear cover. When using the take-up reel, the printer turns off without feeding
the media through the media path.
Parameters:
●
NONE — Select this parameter when you use your printer continuously and the type of media does
not wrinkle.
●
30 min — Media is passed through the media path if there is no printing for more than 30 minutes. If
the printer starts printing before the 30 minute interval, the media is passed through the media path
at the start of printing. Select this parameter when the printer prints in a high humidity environment
frequently and the media is extremely wrinkled.
●
1 hour — Media is passed through the media path if there is no printing for more than 1 hour. Select
this parameter when the print interval is more than 1 hour and the media is extremely wrinkled.
●
2 hours — Media is passed through the media path if there is no printing for more than 2 hours. Select
this parameter when the print interval is more than 2 hours and the media is extremely wrinkled.
●
4 hours — Media is passed through the media path if there is no printing for more than 4 hours. Select
this parameter when the print interval is more than 4 hours and the media is extremely wrinkled.
Use media edge guard (USE EDGE GUARD)
Use this option to activate or deactivate the media edge guards for the selected media type. The right and
left print margins are 10 mm when the media edge guards are used, and 5 mm when they are not used.
See How do I… Use the media edge guards.
ENWW The MEDIA REG menu 173
Tell me about… (menus)
… 183 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP designjet 8000s cutter blade kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info