582840

HP Color LaserJet 2500 series Manual

11
Zoom out
Zoom in
Previous page
1/36
Next page
10
16
1
2
17
3
4
2
Connect the power cable and turn on the printer. 1) Connect the power
cable between the power connector on the back of the printer and an ac
outlet. 2) Press the power switch on the left side of the printer.
Install the imaging drum. 1) Remove the imaging drum from its
packaging. 2) Place the imaging drum on a firm surface and pull the
orange rings to remove the shipping pins. 3) Remove the orange shipping
lock on each end of the imaging drum. 4) Remove the two orange shipping
spacers.
Connectez le câble d'alimentation, puis mettez l'imprimante sous
tension. 1) Branchez le câble d'alimentation entre le connecteur
d'alimentation situé à l'arrière de l'imprimante et une prise murale.
2) Appuyez sur le bouton d'alimentation situé sur la gauche de
l'imprimante.
Installez le tambour d'imagerie. 1) Retirez le tambour d'imagerie de
l'emballage. 2) Placez le tambour d'imagerie sur une surface plane et tirez
les anneaux orange afin de retirer les broches d'expédition. 3) Retirez le
dispositif de sécurité orange à chaque extrémité du tambour d'imagerie.
4) Retirez les deux cales d'expédition orange.
Collegamento del cavo di alimentazione e accensione della
stampante. 1) Collegare il connettore di alimentazione posto nella parte
posteriore della stampante a una presa CA mediante il cavo di
alimentazione. 2) Premere l'interruttore di accensione sul lato sinistro
della stampante.
Installazione del tamburo fotosensibile. 1) Rimuovere il tamburo
fotosensibile dalla confezione. 2) Collocare il tamburo fotosensibile su una
superficie stabile e tirare gli anelli arancioni per rimuovere i piedini di
spedizione. 3) Rimuovere i sigilli di spedizione arancione su tutti i lati del
tamburo fotosensibile. 4) Rimuovere i due distanziatori di spedizione
arancioni.
Conecte el cable de alimentación y encienda la impresora. 1) Enchufe
el cable de alimentación al conector de la parte posterior de la impresora
y a una toma de corriente alterna. 2) Pulse el interruptor de encendido
situado en la parte izquierda de la impresora.
Instale el tambor de formación de imágenes. 1) Saque el tambor de
formación de imágenes de su embalaje. 2) Coloque el tambor de
formación de imágenes en una superficie firme y tire de los anillos
naranjas para retirar el envoltorio. 3) Quite los bloqueos de transporte
naranjas de los extremos del tambor de formación de imágenes. 4) Retire
los dos espaciadores de embalaje naranjas.
Sluit het netsnoer opnieuw aan en schakel de printer in. 1) Sluit het
netsnoer aan op de stroomaansluiting aan de achterkant van de printer en
een wandcontactdoos. 2) Druk op de aan/uit-schakelaar aan de linkerzijde
van de printer.
Installeer de drumcassette. 1) Haal de drumcassette uit de verpakking.
2) Zet de drumcassette op een vlakke ondergrond en trek aan de oranje
ringen om de verzendpinnen te verwijderen. 3) Verwijder de oranje
verzendvergrendeling aan de uiteinden van de drumcassette. 4) Verwijder
het oranje verzendmateriaal (2).
Conecte o cabo de alimentação e ligue a impressora. 1) Conecte o
cabo de alimentação entre o conector de energia na parte de trás da
impressora e uma tomada AC. 2) Pressione o interruptor do lado
esquerdo da impressora.
Instale o tambor de imagens. 1) Retire o tambor de imagens da
embalagem. 2) Coloque o tambor de imagens em uma superfície firme e
puxe os anéis de cor laranja para remover os pinos da embalagem.
3) Retire o lacre de cor laranja de cada extremidade do tambor de
imagens. 4) Retire os dois espaçadores de cor laranja da embalagem.
Anschließen des Netzkabels und Einschalten des Druckers.
1) Schließen Sie das Netzkabel mit einem Ende am Netzanschluss an der
Rückseite des Druckers und mit dem anderen Ende an einer Steckdose
an. 2) Drücken Sie den Netzschalter an der linken Seite des Druckers.
Einsetzen der Bildtrommel. 1) Nehmen Sie die Bildtrommel aus der
Verpackung. 2) Legen Sie die Bildtrommel auf eine feste Oberfläche, und
ziehen Sie an den orangefarbenen Ringen, um die Transportstifte zu
entfernen. 3) Entfernen Sie die orangefarbenen Versandsperren an jedem
Ende der Bildtrommel. 4) Entfernen Sie die zwei für den Transport
angebrachten orangefarbenen Abstandshalter.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Color LaserJet 2500 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Color LaserJet 2500 series in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info