665368

Hotpoint SGC10AA0 Manual

11
Zoom out
Zoom in
Previous page
1/16
Next page
1111
en
steam quantity needed to iron your garments.
To start the Eco function set the steam control (16) to
Eco ( ). When the Steam Ready indicator light (20)
turns on, you can start steam ironing.
Automatic switch-off function (I)
The automatic switch-off function ensures total safety.
This function automatically switches off the steam
generator when it is not used for a few minutes. In
particular, your Power Perfection will automatically
switch off after 11 minutes if it is left unused in the
ironing position, on one side or in a vertical position.
If you leave the steam generator unattended, a buzzer
will sound to inform you that the automatic switch-off
function is active. To restart it, just press the ON/OFF
button.
Wait for the Steam Ready indicator light to
turn on again and for the temperature
indicator light to turn off before start ironing
again.
CLEANING AND MAINTENANCE
After use (J)
1. Disconnect the appliance plug from the electrical
socket and let the steam generator cool down.
2. Empty the water reservoir (8).
3. Place the iron into its housing, making sure that
itstiptsintothe special groove and closethe
iron locking lid (11) using the special iron locking
button (12).
4. Wind the steam cable (13) and the power-supply
cord (10) around the special cord-rewinding clip
(9).
5. Store the steam generator in a safe dry place.
6. Let the steam generator cool down and store it in
a safe dry place.
You cannot use the handle to carry the iron
when it is locked in its special housing. To
carry the iron, rst make sure the locking device
is in place ( closed lock) and the iron is locked in
its special housing. Then lift the iron by holding
its boiler base.
Cleaning (K)
Never use aggressive and/or abrasive
products to clean the plastic parts and the
iron soleplate.
1. Disconnect the appliance plug from the electrical
socket and let the steam generator cool down.
2. Clean the plastic parts of the steam generator
with a soft damp cloth and dry.
3. For routine cleaning and/or the removal of stains
or other residues deposited on the plate, use a
damp soft cloth and dry.
4. Use a damp cotton tip to remove any scale in the
steam holes that may impair the performance of
your steam generator.
In order to keep the soleplate perfectly
smooth and polished, avoid any contact
with metal objects and do not iron sharp objects
such as buttons, studs and hinges - they may
scratch the plate.
5. Tocleanthe Pure Water lter (22),removethe
water reservoir and slide out the Pure Water
lter.Washthelterunderrunningwater,taking
care that the jet of water is not too strong, and
then re-place it.
6. Regularly rinse the water reservoir (8) under
clean water. After cleaning, always empty the
water reservoir.
Scale removal (L)
If your steam generator is not equipped with the
descaling system Calc Proof, clean the vaporisation
chamber to remove any residual calcareous salts.
We recommend cleaning it every time the descaling
button (19) lights up. Follow the procedure below.
The descaling system Calc proof does not
purify water from impurities other than
limescale. We recommend to check that mains
water is not contaminated by these impurities
that could affect the performance of the Power
Perfection. Water may drip out of the soleplate
and can compromise the ironing quality.
If you wish to clean it after using the Power
Perfection, wait at least 3 hours until the
steam generator has completely cooled down.
1. Make sure the appliance is disconnected from
the electrical socket.
Clean it near a sink and away from fabrics
so that they don't get stained.
2. Remove the water reservoir (8) and place the
steamgeneratoronasteadyatsurface.
3. Turn the steam generator upside down. Unscrew
the protection plastic lid (7) and the boiler closing
cap (7a) using an Allen spanner.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hotpoint SGC10AA0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint SGC10AA0 in the language / languages: English as an attachment in your email.

The manual is 9,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info