665368

Hotpoint SGC10AA0 Manual

12
Zoom out
Zoom in
Previous page
1/16
Next page
1212
en
4. Empty the boiler of any residual water.
5. Fill the boiler with 500 ml of water. Then close,
shake the steam generator and empty it. Repeat
the operation at least twice.
6. Close the boiler, making sure its closing cap has
been fastened all the way. Then re-place the
protection plastic lid.
7. Re-place the boiler in its ordinary usage position.
8. Connect the appliance to a socket and press the
ON/OFF button (18).
9. Hold down the descaling button for at least
5 seconds or until a buzzer sounds and the
descaling button turns.
When you start the steam generator again,
before using the steam function on the
garments press the steam button for at least one
minute to eject any residues or particles that
could stain the fabrics.
HINTS
If your steam generator is equipped with the Optimal
Soleplate Temperature technology, you need not
adjust the temperature and/or steam. You can iron all
the types of fabrics that can be ironed in any order.
• Sort the garments out according to the fabric
types. This will reduce the need to adjust the
temperature according to the different fabrics.
• Start with the garments that require a low ironing
temperature and continue with the garments
requiring higher ironing temperatures.
• If you are not sure about the composition of
the fabric, try ironing a hidden part such as a
seam, hem or internal section. Start with low
temperature and gradually increase it until you
ndtheidealironingsetting.
• When you reduce the steam generator’s
temperature to iron delicate garments, wait
approximately 2 minutes to let the steam
generator reach the new settings.
• Pure wool (100% wool) garments can be steam-
ironed as long as the temperature is set to wool.
We recommend using a cotton cloth to prevent
any shiny marks on the garment.
• Never iron areas with obvious perspiration
marks because the heat will make the stains fast
and permanent.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hotpoint SGC10AA0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint SGC10AA0 in the language / languages: English as an attachment in your email.

The manual is 9,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info