665368
9
Zoom out
Zoom in
Previous page
1/16
Next page
99
en
USING YOUR IRON
Temperature selection and steam
adjustment (B)
If your Power Perfection is equipped with the Optimal
Soleplate Temperature technology, you need not
adjust the temperature.
1. Connect the plug of the appliance to a grounded
socket (220/240V).
2. Press the ON button (18) - it will light up to show
that the steam generator is ON.
3. Wait until the temperature indicator light turns off
before starting ironing.
4. Select the appropriate steam setting by means
of the steam control (16) or set it to the Min
position to iron without steam. As soon as the
selected steam quantity is available, the Steam
Ready indicator light (20) will turn on.
5. You can iron all the types of fabrics that can be
ironed in any order.
In the version with no Optimal Soleplate Temperature
technology, follow the instructions below.
1. Connect the plug of the appliance to a grounded
socket (220/240V).
2. Press the ON button (18) - it will light up to show
that the steam generator is ON.
3. Use the temperature control (21) to select the
desired temperature. Every time you rotate the
temperature control, the temperature indicator
light (2) turns on to show that the temperature
is changing.
4. When the iron reaches the set temperature, the
temperature indicator light turns off to show that
the iron is ready for use.
5. Check the type of fabric on the garment label. If
you don't know the type of fabric, we recommend
ironing a hidden part in order to determine
the most appropriate temperature and avoid
damaging the fabric. Silk, wood and synthetic
fabrics: iron the garment inside out to prevent
any shiny marks. Start with the garments that
require a low temperature, e.g. synthetic fabrics.
6. Select the appropriate steam setting by means
of the steam control (16) or set it to the Min
position to iron without steam. As soon as the
selected steam quantity is available, the Steam
Ready indicator light (20) will turn on.
process and in the good operation of the appliance
over a long lifespan. In particular, a high concentration
of limescale may damage some parts of the iron and
cause its early deterioration.
Power Perfection water tank has a capacity of 1000ml
with extra 200ml boiler.
Suitable water
Although the Power Perfection steam generator can
be used with tap water, if the water is very hard (as
measured in French degrees), we recommend mixing
tap water and demineralised water according to the
following table.
Hardness
degree [°f]
Proportion
[tap water:demineralised water]
7°f 1:0
7°f - 14°f 1:0,5
14°f - 22°f 1:1
22°f - 32°f 1:2
32°f - 54°f 1:3
>54°f 0:1
To determine the hardness degree of the water in
your area, contact your local water board or body.
This data is sometimes available on the board/body's
website too.
Filling the water reservoir (A)
Before every use and every time the no-water
indicatorlightturnson,llthewaterreservoir:
1. Use the special handle to remove the water
reservoir (8).
2. When lling the reservoir, make sure the
maximum level shown on the reservoir is not
exceeded.
3. Re-place the water reservoir in the relevant
housing until it clicks into place.
4. Repeat the operation every time the water-level
indicator light (17) turns on.
5. Press the On / Off button to restart ironing after
llingthewatertank.
Never add any perfume, vinegar, starch,
scale-removing agents, ironing products or
other chemicals in the water reservoir - unless
recommended by Hotpoint. Never use
contaminated water.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hotpoint SGC10AA0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint SGC10AA0 in the language / languages: English as an attachment in your email.

The manual is 9,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info