Manual Hot Spring PRODIGY - H (page 35 of 48) (English)

624653

Zoom out

Zoom in

1/48

Spa Care and Maintenance

Page 32

To remove and replace the spa pillows:

1. Carefully pull and lift on one end of pillow to stretch pillow (longer)

until the pillow is released from the plastic retainer. Once one end

is released, push pillow in opposite direction to remove from other

retainer.

2. Align pillow by locating the arrow on back side of pillow and facing the

arrow upwards.

3. Slide one end of pillow onto the spa retainer.

4. Pull other end of pillow; using both hands lift pillow above retainer and

with a stretching motion slide pillow recess onto retainer.

CARE OF THE EXTERIOR

SPA SHELL

Your HOT SPRING spa has an acrylic shell. Stains and dirt generally

will not adhere to your spa’s surface. A soft rag should easily remove

most dirt. Most household chemicals are harmful to your spa’s shell

(see below for detailed information on cleaning agents). Always rinse

off any spa shell cleaning agent with fresh water.

IMPORTANT:

1. The following products are the ONLY approved cleaning agents

for your HOT SPRING spa shell: plain water, HOT SPRING

FRESHWATER Spa Shine, Brillianize

or Soft Scrub

. The use of

alcohol or any other household cleaner other than those listed to

clean the spa shell surface is NOT recommended. DO NOT use any

cleaning products containing abrasives or solvents since they may

damage the shell surface, specifically: Simple Green

, Windex

Spa Mitt. NEVER USE HARSH CHEMICALS! Damage to the shell

by use of harsh chemicals is not covered under the warranty. Always

rinse off any spa shell cleaning agent with fresh water.

2. Iron and copper in the water can stain the spa shell if allowed to go

unchecked. Ask your HOT SPRING dealer about a Stain and Scale

Inhibitor to use if your spa has a high concentration of dissolved

minerals. (Watkins recommends FRESHWATER Stain & Scale

Defense.)

3. Keep all cleaners out of the reach of children and use care when

applying.

EVERWOOD

HD SPA CABINET

HOT SPRING spas include an EVERWOOD HD spa cabinet.

EVERWOOD HD consists of a rigid polymer with an exterior acrylic film

that combines the durability of plastic with the beauty of real wood.

Cleaning of EVERWOOD HD consists of simply spraying the cabinet

with a mild soap and water solution to remove any stains and residue.

Do not rub the EVERWOOD HD with an abrasive material or use

abrasive cleaners as this may damage its texture.

SPASTONE

CABINET

To clean your SPASTONE cabinet or steps, use a mild household

detergent and soft cloth or sponge, and wipe gently. Do not rub the

SPASTONE step or cabinet nor use abrasive cleansers, as these

will damage the SPASTONE painted surface. Following these simple

guidelines will result in a beautiful look for years to come!

Please note that as with any exterior paint, your HOT SPRING

SPASTONE product will fade and weather naturally over time. Contact

your dealer for touch-up paint and instructions.

CARE OF THE SPA COVER

WARNING: The cover is a manual safety cover that meets or

exceeds all prevailing requirements of ASTM 1346-91 for spa safety

covers when installed and used correctly as of the date of manufacture.

Non-secured, or improperly secured covers are a hazard.

Open the cover to its fully open position before use.

VINYL COVER

The vinyl spa cover is an attractive, durable foam insulation product.

Monthly cleaning and conditioning are recommended to maintain its

beauty.

To clean and condition the vinyl cover:

1. Remove the cover from the spa and gently lean it against a wall or

fence.

2. With a garden hose, spray the cover to loosen and rinse away dirt or

debris.

3. Using a large sponge and/or a soft bristle brush, and using a very mild

soap solution (one teaspoon dishwashing liquid with two gallons of water),

or baking soda (sodium bicarbonate), scrub the vinyl top in a circular

motion. Do not let the vinyl dry with a soap film on it before it can be rinsed

clean.

4. Scrub the cover’s perimeter and side flaps. Rinse clean with water.

5. Rinse off the underside of the cover with water only (use no soap), and

wipe it clean with a dry rag.

6. To condition the cover after cleaning, apply a thin film of HOT SPRING

Cover Shield to the vinyl surface and buff to a high luster.

IMPORTANT: To remove tree sap, use cigarette lighter fluid (not charcoal

lighter fluid). Use sparingly, and rinse with a saddle soap solution

immediately afterwards, then wipe dry.

DO:

• Remove snow buildup to avoid breakage of the foam core from the

additional weight of the snow.

• Lock cover lock straps to secure the cover when the spa is not in use.

DON'T:

• Drag or lift the spa cover using either the flaps, or the cover lock straps.

• Walk, stand, or sit on the cover.

• Place any metal or heat transferring object on the cover or place any

type of plastic tarp or drop cloth over the cover as this may result in a

melted foam core, which would not be covered under the warranty.

• Use any lifting mechanisms, chemicals, or cleaners except those

recommended by Watkins Manufacturing Corporation, or its Authorized

Sales and Service Dealer.

Spa Care and Maintenance

I have a 2001 prodigy and the circulation pump doesn’t seem to come on. And now cold weather the jets poor out very cold water. What could this be? Submitted on 18-10-2022 at 15:54
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hot Spring PRODIGY - H in the language / languages: English as an attachment in your email.

The manual is 6,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hot Spring PRODIGY - H Manual

Product: