646888
23
Zoom out
Zoom in
Previous page
1/132
Next page
Use protective gloves
Audible engagement
DIL switch factory setting
2 Safety Instructions
2.1 Intended use
The garage door operator is intended exclusively for the
impulse operation of spring-compensated sectional and
up-and-over garage doors in the private / non-commercial
sector.
Note the manufacturer‘s specifications regarding the door and
operator combination. Potential hazards as outlined in
DINEN13241-1 are avoided by construction and fitting
according to our guidelines. Door systems that are located in
a public area and only have one protective device, such as a
force limit, may only be operated under supervision.
The garage door operator is designed for operation in dry
areas.
2.2 Inappropriate use
Continuous operation and use in the commercial sector is
prohibited.
The operator must not be used for doors without a safety
catch.
2.3 Fitter qualification
Only correct fitting and maintenance in compliance with the
instructions by a competent / specialist company or a
competent/qualified person ensures safe and flawless
operation of the system. According to EN12635, a qualified
person is a person with suitable training, specialist knowledge
and practical experience sufficient to correctly and safely fit,
test, and maintain a door system.
2.4 Safety instructions for fitting, maintenance,
repairs and disassembly of the door system
DANGER
Compensating springs are under high tension
See warning in section3.1
WARNING
Danger of injury due to unexpected door travel
See warning in section7
Fitting, maintenance, repairs, and disassembly of the door
system and garage door operator must be performed by a
specialist.
In the event of a failure of the garage door operator, a
specialist must be commissioned immediately for the
inspection or repair work.
2.5 Safety instructions for fitting
The specialist carrying out the work must ensure that
installation is conducted in compliance with the prevailing
national job safety rules and regulations and those governing
the operation of electrical equipment. The relevant national
directives must be observed. Potential hazards as outlined in
DINEN13241-1 are avoided by construction and fitting
according to our guidelines.
The garage ceiling must guarantee secure fastening of the
operator. For ceilings which are too high or too light, the
operator must be fastened on additional struts.
DANGER
Mains voltage
See warning in section4
WARNING
Unsuitable fixing material
See warning in section3.5.2
Danger to life from the rope
See warning in section3.3
Danger of injury due to unwanted door travel
See warning in section3.7
CAUTION
Crushing hazard during boom fitting!
See warning in section3.5
2.6 Safety instructions for initial start-up and for
operation
WARNING
Danger of injury during door travel
See warning in section4 and 6
Danger of injury by fast-closing door
See warning in section6.2.1
CAUTION
Danger of crushing in the boom
See warning in sections4 and 6
Danger of injury from the cord knob
See warning in section4 and 6
Danger of injuries due to the hot lamp
See warning in sections6 and 7.3
TR10L006-C RE / 11.2013 23
ENGLISH
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hormann Liftronic 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hormann Liftronic 700 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info