646888

Hormann Liftronic 700 Manual

22
Zoom out
Zoom in
Previous page
1/132
Next page
Dear customer,
We are delighted that you have chosen a high-quality product
from our company.
1 About these Instructions
These instructions are original operating instructions as
outlined in the EC Directive2006/42/EC. Read through all of
the instructions carefully, as they contain important
information about the product. Pay attention to and follow the
instructions provided, particularly the safety instructions and
warnings.
Keep these instructions in a safe place for later reference!
1.1 Further applicable documents
The following documents must be available for safe handling
and maintenance:
• These instructions
• The enclosed test manual
• The garage door operating instructions
1.2 Warnings used
The general warning symbol indicates a danger that
can lead to injury or death. In the text section, the general
warning symbol will be used in connection with the caution
levels described below. In the illustrated section, an
additional instruction refers back to the explanation in the
text.
DANGER
Indicates a danger that leads directly to death or serious
injuries.
WARNING
Indicates a danger that can lead to death or serious injuries.
CAUTION
Indicates a danger that can lead to minor or moderate
injuries.
ATTENTION
Indicates a danger that can lead to damage or destruction
of the product.
1.3 Definitions used
DIL switches
Located under the side flap of the operator cover are switches
for activating the operator functions.
Impulse sequence control
With each push of the button, the door is started against the
previous direction of travel, or the motion of the door is
stopped.
Learning runs
Door runs in which the forces necessary for door travel are
taught in.
Normal operation
Door travel with the taught-in travel distances and forces.
Reference run
Door travel towards the OPEN end-of-travel position in order
to set the home position.
Reversing cycle / safety reversal
Door travel in the opposite direction when the safety device or
force limit is activated.
Travel
The distance the door takes to traverse from the OPEN
end-of-travel position to the CLOSE end-of-travel position.
1.4 Information on the illustrated section
The illustrated section shows how to fit an operator on a
sectional door. Deviating fitting steps for an up-and-over door
are also shown. To identify the various types, the following
letters are assigned to the figures:
(a) = Sectional door (b) = Up-and-over door
All dimensions in the illustrated section are in[mm].
1.5 Symbols used
See text section
In the example, 2.2 means: See text
section2.2
Important advice to prevent injury to
persons and damage to property
High exertion of force
Minimal force required
Check for smooth running
22
TR10L006-C RE / 11.2013
ENGLISH
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hormann Liftronic 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hormann Liftronic 700 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info