637666

Hoonved AP48E Manual

13
Zoom out
Zoom in
Previous page
1/20
Next page
30
ENGLISH
Part 2: For the operator
3) During rinsing, the boiler temperature is indicated and
the display LEDs light up in sequence;
By pressing the START “S3” button again, a new washing
cycle will begin;
This machine guarantees rinsing at temperatures ideal
for hygienic purposes;
indeed, if this is not sufcient, the washing cycle is au
tomatically extended so as to provide the necessary
conditions for optimum rinsing at 85°C.
The waiting time required to attain optimum temperature
can extend to a maximum of 8 minutes.
2.1.e.2 Interrupting the cycle
1) It is possible to pause the washing cycle in case of
EMERGENCY, by opening the door;
the message “F1” will appear on the display;
normal operations will resume on closing the door.
2 ) The cycle will also be interrupted by SWITCHING
OFF the machine using the “Q1” button.
3) On switching the machine back on, the LED indicating
the last cycle selected will light up, and the alarm
message “A1” will appear on the display;
this will disappear when a new cycle is begun.
At the end of the washing cycle, take out the basket and
shake it gently so as to remove the last drops left on the
washed items.
Allow items to dry and remove them from the basket
with clean hands.
Store all items on hygienic and completely stable su
faces.
2.1.f Self-washing and Draining
At the end of the washing operations, TURN OFF the
machine pushing the “Q1” button .
Close the machine’s door, press the START button “S3”
(approx. 5 sec.)and keep it pressed until the message
“C1” appears on the display, then release the “S3”
button;
The self cleaning and draining cycle will start, co
rmed by the ashing Leds on the display, with the
activation of the drain pump; the end of the phase will
be conrmed by the appearing of the message “OFF”
on the display. Maximum duration 2 1/2 min
2.1.g Manual draining
It is possible to empty the tank by carrying out the
manual draining cycle, during which only the drainage
pump mains active.
ATTENTION
This cycle can only be carried out by leaving the machi
ne SWITCHED ON and the tank full of water.
Close the machine’s door and press the “S9” or CYCLE
button (approx. 5 sec.). Keep it pressed until the mes
sage “C2” appears on the display, then release the
“S9” or CICLE button;
The Drain cycle will start, conrmed by the ashing Leds
on the display; the end of the phase is conrmed by
the apearing of the message “OFF” on the display.
Maximum duration 1 min.
By pressing the “S9” or CYCLE button you can
interrupt the drainage cycle before the preset time
is up.
LC1 LC2 LC3 LC4
I II III IIII
… 13 …


Need help? Post your question in this forum.

Forumrules
1

Forum

hoonved-ap48e

Reset search

  • fehlermeldung H2 bei einem AP48E Gläserspüler , was tun?
    Submitted on 31-7-2019 at 17:17

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoonved AP48E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoonved AP48E in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hoonved AP48E

Hoonved AP48E User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info