637666
12
Zoom out
Zoom in
Previous page
1/20
Next page
29
Part 1: General description and Safety devices
ENGLISH
Part 2: For the operator
2.1.c Cycle selection
Press the S9or CYCLE button to select the washing
cycle required from the 4 different cycles available
(SHORT, MEDIUM, LONG, INTENSIVE) and speci-
cally:
LC 1: SHORT CYCLE = * 152 sec.
LC 2: MEDIUM CYCLE = * 182 sec.
LC 3: LONG CYCLE = * 242 sec.
LC 4: INTENSIVE CYCLE = * 484 sec.
* without rinsing
2.1.d STARTING UP THE WASHING CYCLE
2.1.d.1 STARTING UP THE WASHING CYCLE
MANUALLY
To start up the cycle MANUALLY, press and hold the
STARTS3” button for approx. 2 sec.
The LEDs of the display will light on in sequence and the
message shown on the display will blink (indicating that
the cycle is underway) at the LED for the selected cycle
will FLASH (e.g., LC2);
2.1.d.2 STARTING UP THE WASHING CYCLE AUTO-
MATICALLY
To start up the cycle AUTOMATICALLY (by opening and
closing the door), you will need to change the cycle
start-up mode. Press and hold the START S3” button
until the pre-selected cycle LED remains CONSTAN-
TLY LIT (approx. 10 sec.) and the washing cycle will
then start up AUTOMATICALLY when the door is
closed.
2.1.e Instructions during the washing cycle
2.1.e.1 Display information
1) During washing, the tank temperature is indicated and
the display LEDs light up in sequence.
2) During drip-drying, only the display LEDs light up.
LC1LC2LC3LC4
I II III IIII
2.1 AP/FW E WASHING PHASES
2.1.a Machine OFF
When the machine is switched OFF the display will read
OFF”:
2.1.b Switching on and preparing the machine
To switch the machine on, press the “Q1” button. The
LED representing the last cycle selected wil
FLASH (LC1 - LC2 - LC3 - LC4).
ATTENTION
When switching on for the rst time, the LC2 light
will FLASH.
First the boiler then the tank will begin to ll automatically.
While the machine is lling up the display will read
F2”.
Once lled, the water-heating elements will be activated,
rst in the boiler then in the tank.
The display will give the tank temperature;
IMPORTANT
It is advisable, when rst switching on, to wait until
the display reads 55°C.
WASHING OPERATION
ATTENTION
When items to be washed are encrusted with burnt
on matter, or a long time has passed between use and
washing, it is essential to carry out a pre-wash soak
using a suitable softening agent.
The use of hand-washing products is to be avoided
as they could produce foam inside the machine.
IPlace the basket of items to be washed inside the machine,
having rst removed any solid waste.
Display cycle underway LED
LED for pre-selected cycle
LC1 LC2 LC3 LC4
I II III IIII
LC1 LC2 LC3 LC4
I II III IIII
Display cycle underway LED
LC1 LC2 LC3 LC4
I II III IIII
Q1 SI t1/t2 S9 S3
LC1LC2LC3LC4
I II III IIII
START
12


Need help? Post your question in this forum.

Forumrules
1

Forum

hoonved-ap48e

Reset search

  • fehlermeldung H2 bei einem AP48E Gläserspüler , was tun?
    Submitted on 31-7-2019 at 17:17

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoonved AP48E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoonved AP48E in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hoonved AP48E

Hoonved AP48E User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info