565055
9
Zoom out
Zoom in
Previous page
1/16
Next page
9
The example shows the following time program:
Set-
point Time Temperature
1 6:00 – 9:00
20 °C (Comfort temperature 1)
2 9:00 – 12:00
16 °C (Setback temperature)
3 12:00 – 14:00
20 °C (Comfort temperature 1)
4 14:00 – 17:00
16 °C (Setback temperature)
5 17:00 – 22:00
22 °C (Comfort temperature 2)
6 22:00 – 6:00
16 °C (Setback temperature)
i
An overview of the program structure is shown on the
last page of these instructions.
Week program
You can adjust the time program to your personal weekly
routine. You have the following options to this purpose:
Separate time programs for weekdays Mo – Fr (1 – 5)
and weekend Sa – Su (6 – 7)
One time program for the days of the week Mo – Su
(1 – 7)
A different time program for each day of the week Mo,
Tu, We, Th, Fr, Sa, Su (1, 2, 3, 4, 5, 6, 7)
i
We recommend that you write down your time pro-
gram before beginning programming.
Setting the time program
Selecting weekdays
1. Press the PROG button.
comfort 1
is displayed.
2. Turn the adjustment dial clockwise until
program
is
displayed.
3. Press the OK button and use the adjustment dial to
select the desired weekdays for your time program:
mo - fr
,
sa - su
,
mo - su
,
mo
,
tu
, ...,
su
or
day off
4. Confirm the selected weekdays with the OK button.
The temperature as well as the beginning and end of
the first setpoint, e.g.:
i
The end of a setpoint is also the beginning of the
next setpoint.
You can use the adjustment dial to change from
one setpoint to another and thus view the setting
of all the programmed setpoints.
Only the programmed setpoints are displayed.
Editing setpoints
1. In order to edit the displayed setpoint press the OK
button.
The temperature display flashes.
2. Use the adjustment dial to select the desired
temperature (Comfort temperature 1, 2 or Setback
temperature) for the selected setpoint and confirm
with OK.
The beginning of the selected setpoint flashes.
i
The time scale for programming of the setpoints
begins at 3:00 in the morning and ends at 2:50 on the
following day.
3. Use the adjustment dial to set the desired beginning
for the selected setpoint and confirm with OK.
The end of the selected setpoint flashes.
4. Use the adjustment dial to set the desired end of the
selected setpoint and confirm with OK.
saved
is displayed briefly. Subsequently the
temperature as well as the beginning and end of the
setpoint are displayed.
5. For the further setpoints also select the temperature
as well as the beginning and end of the setpoint as
described in Steps 1 to 5.
i
A setpoint is not saved until the temperature,
beginning and end have been confirmed with
the OK button.
If a setpoint is not required, select the setting
--.- .
Editing further weekdays
1. When all the setpoints have been edited, use the
PROG button to select the weekdays.
2. Edit the setpoints for the next weekdays.
3. After all the required weekdays have been set, exit
programming with the AUTO button.
The radiator controller operates immediately in
automatic mode with the set time program.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell TheraPro HR90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell TheraPro HR90 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell TheraPro HR90

Honeywell TheraPro HR90 User Manual - German - 16 pages

Honeywell TheraPro HR90 User Manual - Dutch - 16 pages

Honeywell TheraPro HR90 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info