565055
8
Zoom out
Zoom in
Previous page
1/16
Next page
8
7. Programming – Temperatures
Three preset temperatures can be assigned to the set
points in the time program:
Comfort temperature 1 Factory setting 20 °C
Comfort temperature 2 Factory setting 22 °C
Setback temperature Factory setting 16 °C
Setting the temperatures
1. Press the PROG button.
comfort 1
is displayed.
2. Press the OK button, use the adjustment dial to set
the Comfort temperature 1 and confirm with OK.
saved
is displayed briefly and then again
comfort 1
.
3. Turn the adjustment dial clockwise until the next
temperature is displayed.
4. Repeat Steps 2 and 3 for the Comfort temperature 2
and the Setback temperature.
5. Use the AUTO button to exit programming.
i
The three preset temperatures (Comfort temperature
1, 2 and Setback temperature) can be changed at
any time.
i
During programming the PROG button can be
used to return to the next level up.
You can abort programming at any time by using
the AUTO button.
i
An overview of the program structure is shown on the
last page of these instructions.
Operating hints
Operating the radiator controller comfortably
The radiator controller can be removed from the radiator
to facilitate programming.
2.
1.
1. Unlock the radiator controller. To do so, push the slide
at the radiator controller towards .
2. Pull the radiator controller off the valve baseplate.
Lost your way in the program?
fPress the button AUTO/ECO/MANU
automatic
is displayed. The last entry is rejected.
8. Programming – Time program
Planning the time program
You can specify up to 6 setpoints per day.
The following has to be assigned to each setpoint:
One of the three preset temperatures (Comfort
temperature 1, 2 and Setback temperature).
Beginning of the Heating/Setback period
End of the Heating/Setback period
Example
2345
1 6
Comfort
1
Saving
Comfort
2
Lowering/
Saving
Heating
Heating
Heating
Setpoints
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell TheraPro HR90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell TheraPro HR90 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell TheraPro HR90

Honeywell TheraPro HR90 User Manual - German - 16 pages

Honeywell TheraPro HR90 User Manual - Dutch - 16 pages

Honeywell TheraPro HR90 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info