565055
3
Zoom out
Zoom in
Previous page
1/16
Next page
3
1. Pull off the adjustment dial. To do so, start at the notch
on the bottom of the device.
2. If used, unscrew any fastening screws from the
battery compartment.
3. Release the lock and fold out battery spring.
The battery compartment is now accessible.
4. Insert the batteries.
Ensure that the polarity “+” and “–” is correct.
5. Fold down the battery spring and latch it in.
6. Option: Screw the battery spring to secure the
batteries against removal.
7. Place the adjustment dial back on.
First the software version number and then the
language
deutsch
(German) is displayed.
8. If desired, use the adjustment dial to select a different
language.
9. Confirm the selected language with the OK button.
hour
is displayed.
i
The language selection is only displayed during initial
commissioning. During future battery changes, setting
of time and date is prompted directly.
i
The battery life of new alkaline cells amounts to
approx. 2 years. The batteries need changing when
the symbol flashes. All settings are retained
when the batteries are changed.
WARNING
Explosion hazard!
f Never charge non rechargeable batteries.
f Never short-circuit batteries or throw them
into fire.
f Dispose of used batteries ecologically.
Setting the time and date
1. When
hour
is displayed, use the adjustment dial to
set the current hour and confirm with OK.
minute
is displayed.
2. Use the adjustment dial to set the current minute and
confirm with OK.
year
is displayed.
3. Use the adjustment dial to set the current year and
confirm with OK.
month
is displayed.
4. Use the adjustment dial to set the current month and
confirm with OK.
day
is displayed.
5. Use the adjustment dial to set the current day and
confirm with OK.
The normal display with set temperature and selected
operating mode is displayed.
Checking/changing the time and date
Proceed as follows to check or to change the date and time
later on:
1. Press the PROG button.
2. Select
time date
and confirm with OK.
hour
is displayed.
3. Further checking/changing is carried out as described
above.
Mounting the radiator controller
The radiator controller can be mounted on all common
thermostatic valves with an M30 x 1.5 connection
without draining system.
WARNING
Prevent damage to the radiator controller
through humidity and moisture!
f Mount the radiator controller in dry, closed
rooms only.
f Protect the radiator controller against
humidity, moisture, dust, direct sunlight or
exposure to excessive heat.
Removing the old thermostat head
1.
2.
1. Turn the old thermostat head counter-clockwise until
it stops and loosen the mounting ring.
2. Remove the old thermostat head from the radiator
valve.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell TheraPro HR90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell TheraPro HR90 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell TheraPro HR90

Honeywell TheraPro HR90 User Manual - German - 16 pages

Honeywell TheraPro HR90 User Manual - Dutch - 16 pages

Honeywell TheraPro HR90 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info