32665
8
Zoom out
Zoom in
Previous page
1/72
Next page
6
As the batteries are running low, a bAt Lo in-
dicator will flash for 1-2 months before batteries
run out completely. Replace the batteries as
soon as possible after the indicator starts
flashing. If you do not replace the batteries
sometime during the flashing bAt Lo indicator,
the indicator will eventually stop flashing. bAt Lo
will stay on without flashing to indicate the
thermostat and heating/cooling system have
stopped working when the batteries are almost
completely dead.
After the batteries are completely dead, the
bAt Lo indicator will disappear, leaving a
completely blank display.
Press down on left ends of batteries to remove.
If you insert the new batteries within 20-30
7
INSTALL TWO AA ALKALINE
BATTERIES AS SHOWN
M1713
STEP 3
M1719B
REMOVING
BATTERY
DOOR
Install The Batteries
IMPORTANT
Batteries must be installed for programming
and operation of the thermostat and heating/
cooling system.
Purchase two AA alkaline batteries; non-
alkaline batteries will not last as long. We recom-
mend Energizer batteries.
Make sure the thermostat is set in OFF position.
Use a coin to remove battery door.
Install the fresh batteries as shown,
making sure positive and negative terminals are
oriented correctly.
Replace battery door.
seconds of removing the old ones, you will not
have to reprogram the thermostat. However, if
the display is blank, the batteries are dead or
incorrectly installed. In this case, you will have to
reprogram. See pages 12-13 to reprogram.
IMPORTANT
Although the thermostat has a low battery
indicator, replace the batteries once a year to
prevent the thermostat and heating/cooling
system from shutting down due to lack of
battery power.
When leaving home for longer than a month,
as a precaution, change batteries before you
leave to prevent system from shutting down due
to lack of battery power.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell T8132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell T8132 in the language / languages: English, French as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info