32665
10
Zoom out
Zoom in
Previous page
1/72
Next page
9
PROGRAMMING
STEP 4
Program The Thermostat
8
26° C [78° F], 24 hours a day. Also, you do not
need to enter a time and temperature program
for all periods if your schedule does not require
it. For example, a house that is occupied during
weekdays would not require programs for
LEAVE and RETURN.
When pressing the keys, use the ball of your
finger or a soft pencil eraser. Use of sharp
fingernails or pencil points may damage the
keypad.
If at any time during programming you make an
error, just press the RUN PROGRAM key, and
continue again at the step where you left off.
sleeping. (Again, lower heat or higher cool.
Although for more comfortable sleeping,
some people choose not to raise the cool
temperature during the night.)
You will set one schedule for weekdays and
another for weekends, since your requirements
will probably be different for each. Also, during
weekends only the WAKE and SLEEP time
periods are available.
Fill in the times and temperatures you desire for
weekdays and weekends. If you decide not to
program the thermostat, it will automatically
control heating at 20° C [68° F], and cooling at
After the batteries are installed, the thermostat
can be easily programmed in your hand, before
it is installed on the wall.
If you would prefer to program the thermostat
after it is installed on the wall, skip to page 16,
and return later to this programming section.
The following personal programming chart
(pages 10-11) may be helpful for planning your
program schedule of time and temperature
settings for various times of the day.
Four time periods are available during
weekdays WAKE, LEAVE, RETURN,
and SLEEP. These periods can be seen
individually on the display as you press the
SET SCHEDULE key.
WAKE is the time period you want the
house at a comfortable temperature after you
get up, while you get ready for work or
school. (This will be a higher temperature
during heating season, or a lower tempera-
ture during cooling season.)
LEAVE is the time period you can set for an
energy-saving temperature while you are
away at work or school. (This will be a lower
temperature during heating season, or a
higher temperature during cooling season.)
RETURN is the time period you want the
house at a comfortable temperature for
activities before bedtime. (Again, higher heat
or lower cool.)
SLEEP is the time period you can set for an
energy-saving temperature while you are
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell T8132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell T8132 in the language / languages: English, French as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info