478014
43
Zoom out
Zoom in
Previous page
1/58
Next page
43
MAINTENANCE
RÉGLAGE DU CARBURATEUR
Méthode
Démarrer le moteur et le laisser tourner jusqu’à la température d’utilisation. Tourner ensuite la vis de
ralenti [1] à droite ou à gauche, en fonction du réglage à obtenir.
Ralenti
UMK425E UMK431E
3100 ± 200 tr/mn
NOTE: Au ralenti l’outil de coupe ne doit pas tourner.
VÉRIFICATION DE LA BOUGIE D’ALLUMAGE
UMK425E uniquement
1. Pouraccéder àla bougie [4], il est nécessaire de déposer lecache supérieur
du moteur [2].
2. Dévisser la vis [3] à l’aide de la clé six-pans fournie.
NOTE:
Sous le capot du moteur se trouvent des pièces chaudes et mobiles (volant magnétique).
Ne jamais utiliser votre débroussailleuse sans son capot moteur.
VIDANGE DE L’HUILE MOTEUR
NOTE : Vidanger l’huile lorsque le moteur est encore chaud afin d’assurer une vidange rapide et
complète.
1. Vérifier si le bouchon du réservoir d’essence [5] est bien fermé.
2. Enlever le bouchon de remplissage d’huile [7] et vidanger l’huile dans un récipient approprié en
retournant le moteur du côté du goulot de remplissage d’huile [6].
3. Remplir avec l’huile moteur recommandée et vérifier le niveau d’huile [8] (voir page 27).
4. Remettre en place le bouchon de remplissage d’huile [7].
PRÉCAUTION :
Se laver les mains avec de l’eau et du savon après avoir manipulé de l’huile usée.
NOTE:
Prière de jeter l’huile moteur usée conformément aux règles de l’environnement. Nous vous
conseillons de la garder dans un bidon fermé et de l’apporter au dépôt le plus proche. Ne pas la jeter à
la décharge ou la vider sur le sol.
MAINTENANCE
ADJUSTING THE CARBURETTOR
Procedure
Start the engine and let it warm up to normal operating temperature. Then turn the idle screw [1] to the
right or left to obtain the correct setting.
Idle speed
UMK425E UMK431E
3100 ± 200 rpm
NOTE: When the engine is idling, the cutting attachment must not rotate.
CHECKING THE SPARK PLUG
UMK425E only
1. To reach the spark plug [4], the top cover must be removed from the
engine [2].
2. Use the hexagonal wrench supplied to undo the bolt [3].
NOTE:
Hot parts and moving parts (flywheel) are exposed when the engine top cover is removed.
Never use your brush cutter with the engine cover removed.
ENGINE OIL CHANGE
NOTE : Drain the oil while the engine is still warm to assure rapid and complete draining.
1. Check the fuel tank cap [5] is tightened.
2. Remove the oil filler cap [7] and drain the oil into the oil container by tipping the engine toward the
oil [6] filler neck.
3. Refill with the recommended and check the oil level [8] (see page 27).
4. Install the oil filler cap [7].
CAUTION:
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with the environnement. We
suggest you take it in a sealed container to your local service station for reclamation. Do not throw it in
the trash or pour it on the ground.
B7 C1
SAFETY
B7 C1
F
GB
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda UMK431E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda UMK431E in the language / languages: English, German, French as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda UMK431E

Honda UMK431E User Manual - Dutch, Italian, Spanish - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info