720161

Honda Miimo HRM3000 Manual

79
Zoom out
Zoom in
Previous page
1/112
Next page
77
7 TROUBLESHOOTING
Resolving problems
Resolving problems
Unless having the power on is necessary to check something, turn off the power when checking the
condition of the lawnmower or the blade.
Problem Solution
The lawnmower cannot be
charged.
Check the cable connections, conrm that the docking station’s LED indicator
is on (LED indicator should turn on), check that there are no foreign material
in the charging socket that prevent a good electrical connection, and charge
the lawnmower again.
If the lawnmower still cannot be charged, contact your dealer.
The lawnmower will not enter an
area, or the blades and movement
have stopped.
The lawnmower will try to evade an area with a slope of more than 20°. In the
case of a 25 – 30deg slope (depending on unevenness of the ground)
- The lawnmower will try to escape from the slope
In the case of a slope more than 30deg slope
- The lawnmower will try to evade an area a few seconds and stop due to
“Excessive tilt”
The lawnmower stops frequently. Operation of this product with other wireless devices, remote controls, or
electric fences is not guaranteed. Contact your dealer.
The lawnmower leaves the preset
area or behaves differently from
the settings.
See the error message on the screen and follow the instructions before
contacting your dealer. If you cannot solve the issue, contact your dealer with
the error messages ready.
The boundary wire has slackened
and come out of the ground or a
peg has come out of the ground.
Stop the lawnmower because it may cut the wire.
Be careful not to trip on the boundary wire or peg. Contact your dealer.
A strange noise is heard from the
lawnmower or the lawnmower
vibrates.
Check the blades if they are broken or not. Broken blades can create an
unbalanced blade disc. It can create noise.
Try to use “Quiet timer”.
Contact your dealer if it cannot be solved.
The lawnmower does not leave
the docking station. No error
message is displayed.
- Timers were not set up correctly. Check the timer settings. See “4 MENU
SETTINGS” (M page
32).
- The Date and Time are incorrect. Check the clock (M page 59).
- The manual STOP button was pressed, but the H button was not pressed
before closing the control panel cover.
- The lawnmower is in inactive mode.
Another cause could be that the machine is in “Home” mode.
- The lawnmower in the Auto mode will always charge the battery up to 100%.
If you want to make the lawnmower to start mowing sooner, change the
operating mode to the Manual mode.
Poor mowing results. - The cutting height is incorrect or the grass is too high. Adjust the cutting
height or cut with a standard lawnmower rst if the grass is too high.
- Check the condition of the blades (M page 86).
The lawnmower does not work
inside the boundary wire.
- If there are electromagnetic and electric elds near the boundary wire such
as power line, factory, electric noise might affect the movement of your
lawnmower. Contact your dealer.
The lawnmower is found stopped,
and switched off in the garden.
-
A power failure occurred. The lawnmower behaves as follows:
In case that the power supply is cut off for more than 30 minutes, the lawnmower
will shut off automatically to prevent the battery from becoming empty.
In case that the power supply comes back within 30 minutes, the lawnmower
will start mowing automatically. *
* The lawnmower will return to the docking station if the battery residual
capacity is low.
The lawnmower goes out of the
boundary wire.
Record where the lawnmower goes out of wire.
Check the ground condition, weather condition and tyre condition when the
lawnmower goes out of the boundary wire. Clean up the tyre if it has any mud,
leaves, or grass. Try to continue. If the issue occurs frequently, contact your dealer.
The lawnmower does not dock
into the docking station.
Check station condition if it deformed or not. Check boundary wire underneath
the station (M page 12). Clean up the charging socket of both the lawnmower
and station.
… 79 …


Need help? Post your question in this forum.

Forumrules
1

Forum

honda-miimo-hrm3000

Reset search

  • How do I reset the password if I have forgotten it? Submitted on 11-3-2023 at 14:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Miimo HRM3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Miimo HRM3000 in the language / languages: English as an attachment in your email.

The manual is 36,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Miimo HRM3000

Honda Miimo HRM3000 User Manual - German - 108 pages

Honda Miimo HRM3000 User Manual - Dutch - 108 pages

Honda Miimo HRM3000 User Manual - French - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info