590835
64
Zoom out
Zoom in
Previous page
1/81
Next page
64
4.3.8 “CONNECTING MODE” menu
In connecting mode you can teach-in the internal sensors of the WDC7000 to other WDC7000
stations and to the HomeMatic central control unit. To do this, you must set the corresponding
connection partners and the WDC7000 to teach-in mode.
CONNECTING MODE OK
- To launch teach-in mode touch “OK” and the following appears:
CONNECTING
The WDC7000 is now in teach-in mode. Once the teach-in procedure has been completed suc-
cessfully, teach-in mode and the conguration menu are exited. If no teaching-in is performed
for 20 seconds, teach-in mode and the conguration menu are exited.
4.3.9 “CLEANING” menu, cleaning mode
As the display is touched on a regular basis this can make it dirty, so it must be wi-
ped with a dry linen cloth from time to time (a cleaning cloth for spectacles is ideally
suited to this task; do not use any cleaning uids as this could damage the display).
To ensure that you do not change any settings on the station when wiping the dis-
play, you can use cleaning mode, which locks all touch elds for 20 seconds.
- Select the “CLEANING” menu:
NEXT CLEANING ENTER
- Touch “ENTER” and the following appears:
CLEANING START
- Touch “START and the following appears:
CLEANING WAIT
- You can now clean the display. After 20 s the normal display will reappear.
4.3.10 “LIVE MODE” menu, calling the current weather data trend
In this mode, you can touch an additional eld to prompt the combination sensor to send its
measured data at 1 second intervals for 10 seconds. So a single touch is all that is needed to
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HM-WDC7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HM-WDC7000 in the language / languages: English, German as an attachment in your email.

The manual is 7,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info