590835

HomeMatic HM-WDC7000 Manual

62
Zoom out
Zoom in
Previous page
1/81
Next page
62
- Select the “SYSTEM” menu then the “ALTITUDE” option (via BEEP, DCF, DST and
INTERVAL) and the following appears:
ALTITUDE ENTER
- Touch “ENTER” and the following appears:
ALTITUDE + 0000 -
- Touch “+” or “-” to set the geographical height of the location above sea level in
metres.
- Wait for a few seconds. The adjusted data for the relative barometric pressure will
then appear on the display.
Alternatively, the value can also be entered via the PC program.
“RAIN CAL”, entering the rain sensor adjustment value
The rainfall measuring system is factory-set to a high degree of accuracy, so it does
not usually need to be adjusted.
The adjustment value must rst be calculated in normal mode, as described in the
section titled “Adjusting the rainfall measuring sensor”.
- Select the “SYSTEM” menu then the “RAIN CAL” option (via BEEP, DCF, DST,
INTERVAL and ALTITUDE) and the following appears:
RAIN CAL ENTER
- Touch “ENTER” and the following appears:
RAIN CAL + 295 -
- Touch “+” or “-” to set the previously calculated value.
- Wait for a few seconds. The device will then return to normal mode.
Alternatively, the value can also be entered via the PC program.
“SUN CAL”, conguring the brightness threshold for hours of sunshine
The WDC7000 weather station works in conjunction with the WDS100-C6-O combi-
nation sensor to determine the hours of sunshine. The threshold value is set on the
base station and transmitted to the combination sensor. This sensor then evaluates
the data:
Brightness received at sensor greater than threshold value → sun shining
Brightness received at sensor lower than threshold value → sun not shining
… 62 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HM-WDC7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HM-WDC7000 in the language / languages: English, German as an attachment in your email.

The manual is 7,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info