590835
63
Zoom out
Zoom in
Previous page
1/81
Next page
63
The user can set the brightness threshold on an individual basis in order to adapt
the sensor to local conditions. The threshold value should be dened as when the
sun comes up or goes down so that the current brightness value can be used to
calculate the threshold.
Example: After sunrise the brightness value is 131, for example. This means that the
threshold value should be set to 131 so that the hours of sunshine start to be coun-
ted from that point.
- Select the “SYSTEM” menu then the “SUN CAL option (via BEEP, DCF, DST,
INTERVAL, ALTITUDE and RAIN CAL) and the following appears:
SUN CAL ENTER
- Touch “ENTER” and the following appears:
SUN CAL 131 + 085 -
- Touch “+” or “-” to set the threshold value. The setting range runs from 0 to 255.
- Wait for a few seconds. The device will then return to normal mode.
1
It is not possible to directly convert this value into the lux unit of luminance.
„STORM WARNING“, threshold for activating the storm warning
The storm warning is activated if the air pressure drops by a predened value (or more) within
one hour. The minimum value is specied in hPa (Hectopascals) and can be congured as
follows:
- Select the „SYSTEM“ menu then the „STORM WARNING“ option (via BEEP, DCF, DST, INTERVAL,
ALTITUDE, RAIN CAL and SUN CAL) and the following appears:
STORM WARNING ENTER
- Touch „ENTER” and the following appears:
STORM WARNING 5 HPA
- Touch the „HPA“ buttons to reduce the value or touch the numbers to increase the threshold.
Decrease threshold
Threshold currently set
Increase threshold
Current brightness value1
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HM-WDC7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HM-WDC7000 in the language / languages: English, German as an attachment in your email.

The manual is 7,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info