650400

HomeMatic HM-Sec-SFA-SM Manual

32
Zoom out
Zoom in
Previous page
1/40
Next page
32
In this case, coding is activated using a system security key that differs
from the one supplied with the product.
To reset the actuator, you will have to use the conguration software for
resetting the central control unit. The procedure to follow is
described in the manual for the central control unit software.
10 Response to power recovery
The instructions below describe how the device responds to a power
failure (or disconnection from the mains) and the failure of the battery.
When the operating voltage is switched on (recovery of mains voltage),
the actuator checks its components. If an error is detected, all channel
LEDs will ash. This is repeated continuously and the device does not
perform its function. If the test is completed without errors, the actuator
transmits a wireless telegram containing its status information. To pre-
vent all actuators transmitting at the same time when power is recove-
red, there is a random delay before the actuator transmits. During this
time, the channel LEDs ash (as in teach-in mode). If the delay is very
short, this ashing may be almost
imperceptible.
11 Channel LED feedback
11.1 Channel LED ashing codes
Various actuator states are indicated by the channel LEDs ashing:
Slow ashing Teach-in mode
Fast ashing Reset
One long ash, n brief ashes (depending
on the type of error)
Error
Long on, short off Corresponding output
activated with
switch-off timer
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HM-Sec-SFA-SM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HM-Sec-SFA-SM in the language / languages: English, German as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info