Manual HomeMatic HM-Sec-SFA-SM (page 31 of 40) (English, German)

650400

Zoom out

Zoom in

1/40

8 Operation

After teach-in has been performed, simple operator and activation

functions are available via the taught-in control elements, sensors

or the central control unit:

• Each channel can be activated or deactivated in accordance with

the taught-in operator or activation element.

•

If an attempt is made to tamper with the device (tamper contact on the

signalling device, actuator tamper contact, disconnection from power

supply), a tamper signal is sent to the central control unit.

Tamper signals can only be evaluated with a central control unit,

e.g. CCU or alarm central unit.

If alarm scenarios have been congured for these events, they

should be deactivated before commencing service operations

(e.g. battery replacement).

9 Resetting to the

initial state

• Press and hold down the channel button for channel 1 (siren) for at

least 4 seconds. The channel LED starts to ash slowly.

•

To reset the device, press and hold down the teach-in button again

for at least 4 seconds. The LED will now start to ash faster.

• To complete the reset operation, release the channel button; the

LED will go out to conrm that the device has been reset.

Possible error messages:

(This error can only occur if you have a central control unit on which you

have taught-in the device.)

If the LED does not start to ash once the button has been held down for

4 seconds but lights up continuously instead, the device cannot be reset.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HM-Sec-SFA-SM in the language / languages: English, German as an attachment in your email.

The manual is 1,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HomeMatic HM-Sec-SFA-SM Manual

Product: