650400
30
Zoom out
Zoom in
Previous page
1/40
Next page
30
7 Start-up
7.1 Simple operator functions on the device
The siren and the ashing light can be operated directly using the control
buttons and LEDs on the device (there is one control button and one
LED for each).
You can check the functions of the connected signalling device, as well
as the integrity of the electrical installation, immediately after installation
(without teaching-in).
Simply press and release the button to operate the actuator. Pres-
sing and holding down the button (for more than 4
seconds) will switch the actuator to teach-in mode.
7.2 Teaching-in
Please read this entire section before starting the teach-in procedure.
To execute the teach-in procedure, both of the devices to be connected
must be in teach-in mode and the channel to be taught-in must be
selected.
To teach-in on an actuator channel, press and hold down the corre-
sponding channel button for approximately 4 seconds. The device
LED will ash continuously to indicate that teach-in mode is active.
Once teaching-in has been completed successfully, the device LED
will go out.
If no teaching-in is carried out, teach-in mode will be exited
automatically after 20 seconds.
Note: If the actuator has already been taught-in on a central control unit
and is therefore blocked for direct teach-in, this will be indicated by the
device LED lighting up briey (instead of ashing continuously). Direct
teach-in is not possible.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HM-Sec-SFA-SM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HM-Sec-SFA-SM in the language / languages: English, German as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info