505947
18
Zoom out
Zoom in
Previous page
1/25
Next page
- 17 -
PROGRAMME REMINDERS
Programme reminders can be set to signal that a
programme is about to start when you are watching
another channel. A reminder is set from the
Electronic Programme Guide screen.
Press the [GUIDE] key to display the EPG screen
and press [RIGHT] to display the next programme
details in the text window and highlight the name of
the next programme in the list of channels. Press
[SELECT] when a programme you want to watch is
highlighted and the reminder icon is displayed
against that programme's name.
You can exit the EPG screen in the normal way -
pressing [GUIDE], [MENU]. Later, shortly before the
programme is due to start, the receiver will display
a reminder on the screen over the picture of the
channel being viewed.
Use the [LEFT] or [RIGHT] keys to highlight the YES
or NO buttons as appropriate and press [SELECT].
If you select the YES button, the receiver switches
over to the reminder channel.
Note:Reminder events are ignored if any timer
event is active at that time.
EVENT TIMER
You can also set a timer to switch the receiver to
any channel without your intervention. Thisis
intended for making video recordings of
programmes when you are out. If a single
programme is to be recorded, the receiver can be
left switched to the required channel and the timer
set on the VCR. However, if two or more
programmes on different channels are to be
recorded then the DVB - T3 receiver's own timer is
set as well, to select the required channel when it is
needed.
Display the Main Menu by pressing the [MENU] key
and highlight and select the Timers line to display
the Timer menu screen. Up to five separate timer
events can be set and each is displayed in the Timer
screen, showing the event number, the channel to
be selected, the start time, end time, date and the
mode - whether that event is active (and will be acted
on) or not.
To set an event, highlight its mode button using the
[UP] or [DOWN] keys and press [SELECT] to
display the timer entry window. Here the five
settings of channel name, start time, end time, date
and frequency mode can be set. You can move
freely between each setting using the [UP] and
[DOWN] keys. The channel name is set using the
[LEFT] or [RIGHT] keys to display the channel which
broadcasts the programme to be recorded. The start
time, end time and date are each set with the
number keys on the remote control in 24-hour
format. The frequency mode determines how often
the receiver operates this event and is set with the
[LEFT] or [RIGHT] keys to be either Once, Daily,
or Weekly.
Hint
If an invalid number for the start or end times
or the date is entered, the highest valid number
is automatically entered in its place. So,
entering 28:30 as the time will automatically
change to 23:30, and a date of 15:14:2002 will
change to 15:12:2002.
Pressing [MENU] or [SELECT] returns to the Timer
screen with the settings in place in the timer event
list. The event mode is automatically set to Active
and you can now return to normal viewing (press the
[MENU] keys) and at the appointed time the
receiver will switch over to the required channel and
at the end of the event, switch the receiver to
standby.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi HDB60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi HDB60 in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info