505947
16
Zoom out
Zoom in
Previous page
1/25
Next page
- 15 -
Hint
You can also enter a channel name using the
number keys on the remote control. Each key
represents several letters and pressing a key
several times will enter each letter (in both
capitals and lower case), and the number, in
turn, in the character position marked by the
cursor. The zero key enters all the punctuation
marks available and a blank space. With
practise, this is a very quick means of entering
the required letters into the channel name.
CHANNEL AND MENU PROTECTION
CHANNEL LOCK
Some channels broadcast material which you do not
want younger members of the family to watch. Any
channel can be 'locked' so that it cannot be selected
for viewing without first a four-digit PIN code being
entered. In this way any channel not suitable for
younger viewers can be protected.
The channel lock is applied with the Channel List
menu. Press the [MENU] key on the remote control
handset to display the Main Menu and then, using
the [UP] or [DOWN] keys on the remote control,
make sure that the first item, Channel List, is
highlighted in yellow and press the [SELECT] key.
Highlight the channel to be locked using the [UP] or
[DOWN] keys. Now select the LOCK button at the
base of the screen with the [LEFT] or [RIGHT] keys
and press [SELECT].
A window requesting the PIN code is displayed and
the four-digit code should be entered using the
number keys on the remote control, followed by the
[SELECT] key. A lock icon is then displayed
alongside the channel name in the channel list.
Hint
The PIN is factory set to 0000. This code should
be reset (as described below) to another
sequence of numbers, known only to you, when
you have finished setting up the receiver.
You can now leave the Channel List screen and
return to normal TV viewing by pressing [MENU].
Any attempt to change channel to the locked
channel will now display the same window requesting
the PIN code and the channel will only be displayed
on entry of the correct code. To remove the lock on
a channel, repeat the same process as to lock the
channel.
MENU LOCK
Simply locking a channel will not deflect a
determined would-be viewer. Re-installing the
complete channel list, for example, will bypass the
channel lock. However, the menus can be locked
out of use too, to prevent this.
Display the Main Menu by pressing the [MENU] key,
highlight Configuration, and press [SELECT] to
display the Configuration menu screen. Highlight the
Parental Settings line of the menu (press [DOWN]
five times) and press [SELECT] to display the
Parental Settings menu (after the PIN code has been
entered). Here the menu lock-out can be set and the
PIN code changed.
With the Menu Lock line highlighted, use the [LEFT]
or [RIGHT] to cycle the menu lock setting through
Disabled, Main Menu and Installation. The Main Menu
setting will lock out the complete menu system; the
Installation Menu setting locks only the Installation
menu (see Section 3 - ADVANCED OPERATION -
Re-installation); and the Disabled setting allows free
access to any of the menus.
You must return to normal TV viewing by pressing
the [MENU] key (three times) to activate the lock.
Now any attempt to access the locked menus will
display the PIN request window and the menus will
only be displayed on entry of the correct PIN code.
The same Parental Settings menu is used to change
the PIN code. With the Set Lock Key line
highlighted, press [SELECT] to display the Set Lock
Key window. This requests the new four-digit code
to be entered twice (for confirmation) and the new
code comes in effect when you return to the
Configuration menu by pressing [MENU].
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi HDB60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi HDB60 in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info