505947
19
Zoom out
Zoom in
Previous page
1/25
Next page
- 18 -
When the Timer screen is displayed, any event can
be set to be Inactive (so it will not occur) or the
channel, times and frequency mode altered by
highlighting the event's Mode button and pressing
[SELECT] as before.
You can exit the Timer screen and return to normal
TV viewing by pressing [MENU].
Hint
If you are watching digital terrestrial TV at the
time the timer event starts, a message is flashed
onto the screen announcing that the receiver is
'Switching to timer channel' so you understand
what is happening.
RE-INSTALLATION
Although your
HDB60 receiver will not lose its
settings or stored channels when switched off, you
may wish to re-install the receiver because you
have moved to a different area with different
broadcast frequencies, you wish to reinstate a
channel previously deleted from the channel list, or
you want to watch new channels which have started
broadcasting.
Press the [MENU] key to display the Main Menu
and using the [UP] or [DOWN] keys, highlight the
Installation line and press [SELECT] to display the
Installation Menu.
You can either perform a First Time Installation,
effectively resetting the receiver to its ex-factory
condition, or just search for channels.
FIRST TIME INSTALLATION
To reset the receiver, highlight the First Time
Installation line in the menu and press [SELECT]. A
warning screen is displayed in case of accidental
operation.
Highlight the YES button with the [LEFT] or [RIGHT]
key and press [SELECT] to erase all the channels
and settings and switch the receiver to standby.
You can now start again as detailed in Section 1 -
PREPARATION - Tuning In.
ADD CHANNELS
The
HDB60 receiver can search for channels
automatically (searching all the broadcast
frequencies for free-to-air channels) or manually
(searching one specified broadcast frequency only
for any channels to be found there).
Press the [MENU] key to display the Main Menu
and using the [UP] or [DOWN] keys, highlight the
Installation line and press [SELECT] to display the
Installation Menu. Highlight the Add New Channels
line and press [RIGHT] to display the options. Select
Automatic Search with the [UP] or [DOWN] keys
and press [SELECT]. A warning message is
displayed. This starts the automatic tuning process
as described in Section 1 - PREPARATION - Tuning
In, and searchesthrough all the available broadcast
frequencies for free-to-air channels. Previous
channels will be replaced on automatic search.
If, alternatively, from the search options menu the
Manual Search line is highlighted and [SELECT]
pressed, the manual search screen is displayed.
Highlight the YES button with the [LEFT] or [RIGHT]
key and press [SELECT] to start the automatic
search.
This is for searching for digital channels on a single
broadcast frequency. The frequency channel
number (21-69) is entered in the box at the top left
of the screen and the received signal level and signal
quality can be observed on the bar graph and signal
quality indicator at the bottom.
When [SELECT] is pressed, the receiver searches
that frequency and display a list of the channels
found. Before returning to the Installation menu.
Again, channels which duplicate those already in the
channel list are ignored. However, the manual
channel search will find all channels on the broadcast
frequency.
When either search is finished, press the [MENU]
key to return to normal broadcast viewing, to watch
the new digital terrestrial television channels found.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi HDB60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi HDB60 in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info