Manual Hitachi DS 12 DVF 3 (page 15 of 108) (English, German, Dutch, French, Italian, Portuguese, Spanish)

78142

Zoom out

Zoom in

1/108

English

4. The scope and suggestions for uses

The usable scope for various types of work based on the

mechanical structure of this unit is shown in Table 6.

Table 6

Work Suggestions

Drilling

Wood

Use for drilling purpose.

Steel

Driving

Machine screw Use the bit or socket matching the screw diameter.

Wood screw Use after drilling a pilot hole.

5. How to select tightening torque and rotational speed

Table 7

Use

Clutch Dial

Position

Rotating speed selection (Position of the shift knob)

LOW (Low speed) HIGH (High speed)

Driving

Machine screw 1 – 22

For 4 mm or smaller diameter

screws.

For 6 mm or smaller diameter

screws.

Wood screw

1 –

For 8 mm or smaller nominal

diameter screws. (DS18DVF3)

For 4.8 mm or smaller nominal

diameter screws. (DS18DVF3)

For 6.2 mm or smaller nominal

diameter screws. (DS14DVF3)

For 3.8 mm or smaller nominal

diameter screws. (DS14DVF3/

DS12DVF3/ DS9DVF3)

For 5.8 mm or smaller nominal

diameter screws. (DS12DVF3/

DS9DVF3)

Drilling

Wood

For 38 mm or smaller diameters.

(DS18DVF3)

For 24 mm or smaller diameters.

(DS18DVF3)

For 30 mm or smaller diameters.

(DS14DVF3)

For 12 mm or smaller diameters.

(DS14DVF3/ DS12DVF3/DS9DVF3)

For 25 mm or smaller diameters.

(DS12DVF3)

For 21 mm or smaller diameters.

(DS9DVF3)

Metal

For drilling with a metal working drill

bit.

––––––––––––––––––––––

CAUTION

○ The selection examples shown in Table 7 should be

considered as general standard. As diﬀ erent types of

tightening screws and diﬀ erent materials to be tightened

are used in actual works proper adjustments are naturally

necessary.

○ When using the driver drill with a machine screw at

HIGH

(high speed), a screw may damage or a bit may loose

due to the tightning torque is too strong. Use the driver

drill at LOW (low speed) when using a machine screw.

6. Mounting and dismounting of the bit

(1) After inserting a driver bit, etc. into

the keyless drill chuck,

ﬁ rmly grasp the ring and tighten the sleeve by turning it

toward the right (in the clockwise direction as viewed

from the front) (See Fig. 9).

○ If the sleeve becomes loose during operation, tighten it

further. The tightening force becomes stronger when the

sleeve is

tightened additionally.

(2) Dismounting the bit

Firmly grasp the ring and loosen the sleeve by turning

it toward the left (in the counter-clockwise direction as

viewed from the front) (See Fig. 9).

(1) Mounting the bit

Loosen the sleeve by turning it toward the left (in the

counterclockwise

direction as viewed from the front)

to open the clip on the keyless chuck. After inserting a

driver bit, etc., into the keyless drill chuck, and tighten

the sleeve by turning it toward the right (in the clockwise

direction as viewed from the front) (See Fig. 10).

○ If the

sleeve becomes loose during operation, tighten it

further.

The tightening force becomes stronger when the sleeve

is tightened additionally.

(2) Dismounting the bit

Loosen the sleeve by turning it toward the left (in the

counterclockwise direction as viewed from the front), and

then take out the bit, etc (See Fig. 10).

CAUTION

When it is no longer possible to loosen the sleeve, use a

vise or similar instrument to secure the bit. Set the clutch

mode between 1 and 11, and then turn the sleeve to the

loose side (left side) while operating the clutch. It should

be easy now to loosen

the sleeve.

7. Conﬁ rm that the battery is mounted correctly

000Book_DS9DVF3_WETha.indb 15000Book_DS9DVF3_WETha.indb 15 2012/06/06 8:46:152012/06/06 8:46:15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DS 12 DVF 3 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 7,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi DS 12 DVF 3

Hitachi DS 12 DVF 3 User Manual - English, Danish, Swedish, Norwegian, Finnish - 46 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi DS 12 DVF 3 Manual

Product: