816406

Hikoki C12RSH2 Manual

35
Zoom out
Zoom in
Previous page
1/284
Next page
English
35
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
V volts
Hz hertz
A amperes
nono load speed
Class II Construction
---/min revolutions per minute
alternating current
SPECIFICATIONS
Max. Cutting
Capacity
Height × Width
0° 105 mm × 312 mm
Miter 45° 105 mm × 220 mm
Bevel Left 45° 68 mm × 312 mm
Right 45° 43 mm × 312 mm
Compound
Bevel (Left) 45° + Miter (Left) 45° 68 mm × 220 mm
Bevel (Left) 45° + Miter (Right) 31° 68 mm × 265 mm
Bevel (Right) 45° + Miter (Right) 45° 43 mm × 220 mm
Bevel (Right) 45° + Miter (Left) 31° 43 mm × 265 mm
Saw Blade Dimensions (oD × iD × Thickness) 305 mm × 30 mm × 2.3 mm
Maximum kerf 2.8 mm
Miter Cutting Angle Right 0° – 57°, Left 0° – 45°
Bevel Cutting Angle Right 0° – 45°, Left 0° – 45°
Compound Cutting Angle Bevel (Left) 0° – 45° Miter (Left) 0° – 45°, (Right) 0° – 31°
Bevel (Right) 0° – 45° Miter (Right) 0° – 45°, (Left) 0° – 31°
Voltage (by areas)* 110 V 230 V
Power Input* 1520 W
No-Load Speed 4000 min–1
Machine Dimensions (Width × Depth × Height) 655 mm × 890 mm × 724 mm
Weight (Net)** 27 kg
Laser Marker
Maximum output Po<0.4 mW Class 1M Laser Product
(Iambda) 650 nm
Laser medium Laser Diode
* Be sure to check the nameplate on product as it is subject to change by areas.
** According to EPTA-Procedure 01/2014
STANDARD ACCESSORIES
○ 305 mm TCT Saw blade (mounted on tool) ...................1
○ Dust bag .......................................................................1
○ 17 mm Box wrench .......................................................1
○ Vise Assembly ..............................................................1
○ Holder ...........................................................................1
○ Side Handle (mounted on tool) .....................................1
○ Sub Fence (mounted on tool) ........................................1
○ Holders .........................................................................2
○ Sub table assembly .......................................................2
Standard accessories are subject to change without notice.
APPLICATION
Cutting various types of aluminium sash and wood.
PRIOR TO OPERATION
CAUTION
Make all necessary adjustments before inserting the
plug in the power source.
1. Power source
Ensure that the power source to be utilized conforms
to the power requirements specifi ed on the product
nameplate.
Do not use with direct current, or transformers such as
boosters. Doing so may result in damage or accidents.
2. Power switch
Ensure that the power switch is in the OFF position. If the
plug is connected to a receptacle while the trigger switch
is in the ON position, the power tool will start operating
immediately, inviting serious accident.
00BookC12RSH2.indb3500BookC12RSH2.indb35 2021/11/0912:16:172021/11/0912:16:17
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikoki C12RSH2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikoki C12RSH2 in the language / languages: All languages as an attachment in your email.

The manual is 9.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info