frequencies to protect the subwoofer from damages.
These low frequencies can cause damages.
The frequency is adjustable from 15 Hz to 55 Hz.
LOW PASS - This controller adjusts the frequency
response of your subwoofer upwards and is
continously variable from 35Hz to 250Hz.
LEVEL - This allows to adjust the input sensitivity
from 6 Volts to 0,2 Volts.
REMOTE
Connection for the provided bass remote
control. Allows to adjust the subwoofer
from e.g. the driver's seat.
SLAVE OUT/LINE IN - RCA Inputs
SLAVE OUT - Connect with good quality
RCA to RCA cable with the slave´s LINE IN.
LINE IN - Full range line input to connect with
the head unit´s RCA Outputs.
Power - LED - If the green LED is illuminated, the amplifier is in operation mode.
Protect - LED - If the red LED is illuminated: Overheated, speaker wires shorted, Overload (too low Impedance, less Power Supply), Amplifier
is damaged. The built-in electronic diagnostic protection saves the amplifier and speakers from serious damage. If the red LED lights up due to
overheating, let the amplifier cool down a while and then turn it on again. If the red light is still lighting up, ensure that all connections, especially
the speakers are correct and not shorted. If the amp is still in protection mode, try to restart the amplifier without any speaker or RCA wires. If
the green light is now lighting up, re-check again all speaker- and RCA-connections, to ensure correct connection.
PHASE - phase shift from 0° to 180°, to match
the subwoofer to the vehicle's acoustic enviroment.
FREQ RANGE - Allows you to adjust the frequency at which the bass
boost should work. It is continously variable between 20Hz up to 80Hz.
Q CONTROL - Allows you to adjust the filter performance Q of the
Crossover. So you can change the playback quality in the range of the
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Hifonics txi 1700 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Hifonics txi 1700 in the language / languages: English, German as an attachment in your email.
The manual is 1,72 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
