488783
20
Zoom out
Zoom in
Previous page
1/44
Next page
20
4 Getting Started
Synchro recording won't work if
the source is already playing!
The recorder goes into all-sync
record pause and the
SYNC
indicator starts to blink.
SYNC–ALL
SYNC
CD-R
The display shows the all-track
sync mode, with the SYNC
indicator blinking to show that
recording can start.
4 Play the source.
The recorder starts recording
automatically.
5 After recording all tracks
from the source, the
recorder goes into record-
pause.
After the recorder encounters
about five seconds of continuous
silence, it assumes the end of the
source has been reached and
goes into record-pause and the
display shows the SYNC ALL
message again.
Be careful: If the recorder
detects another signal or start ID
(DAT or DCC) it will start
recording again!
The recorder will enter record-
pause if the digital signal is
interrupted for more than 5
seconds—see
Digital signal
interruptions
on page 18.
6 Press
77
77
7 to finish recording.
After pressing 7, the display
shows PMA REC while it records
the track information to the disc.
Note: If you find that synchro
recording does not seem to work,
see the troubleshooting section
on pages 40-42 for possible
remedies.
ENTER
CURSOR
MENU/
DELETE
TEXTMARK
SET
CLEAR
TITLE
/MODE
7
1
¡
8
3
4
¢
ABC DEF
GHI MNOJKL
PQRS TUV WXYZ
REC SYNCHRO
REPEAT RANDOM NAME CLIP
I
NPUT
SELECTER
FADER
SKIP PLAY
COMPACT DISC RECORDER
REMOTE CONTROL UNIT
SKIP ID
PROGRAM CHECK CLEAR
AUTO /
MANUAL
123
4
56
78
9
10/0 >10
SCROLL
DISPLAY
•
6
3
2
Recording all
tracks from a
source
If you want to copy all the tracks
from a source, use this mode. Like
the 1-track synchro recording
mode, the recorder starts and
stops automatically. When
recording from MD or CD, you can
play the source in either normal
play mode, or program play if you’d
like the recorded tracks in a
different order to the original. We
do not recommend recording from
a DAT in program play mode—use
the 1-track synchro recording
mode if you want to record the
tracks in a different order.
If you are recording from a noisy
analog source, such as an old
recording, or from a source with
long quiet sections, the recorder
may not recognize the end of
tracks. In this case, you can still use
this mode, but it may be better to
use manual track numbering (see
page 33).
1 Load a CD-R or CD-RW
disc.
Check the display to make sure
that there's enough space on the
disc for what you want to record.
2 Press INPUT SELECTOR to
choose an input.
Pressing
INPUT
SELECTOR
repeatedly
switches the active input:
Analog - Optical - Coaxial
The recorder's display indicates
the current input.
3 Make sure that the source
is not playing, then press
SYNCHRO twice.
Press SYNCHRO repeatedly to
change the recording mode and
select SYNC-ALL.
DIGITAL
REC LEVEL
ANALOG
REC LEVEL
MENU/
DELETE
TEXT
SYNCHRO
PROFESSIONAL
MONITOR
INPUT
SELECTOR
AUTO
MANUAL
TITLE/MODE
TRACK NO.
WRITE
DISPLAY
FINALIZEERASE
SCROLL
CD TEXT
1
2
36
SYNC–1
SYNC-1
SYNC–ALL
SYNC
SYNC–FINAL
SYNC
CD-R
CD-R
CD-R
O1 O1 OO:OO
FINALIZE
CD-R
1-track sync
All-track sync
All-track sync
w/ finalization
Record-pause
(no sync)
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HHB CDR-830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HHB CDR-830 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info