488783
19
Zoom out
Zoom in
Previous page
1/44
Next page
19
4 Getting Started
Recording one
track from a
source
If you want to record just a single
track, or a few selected tracks,
from a digital (CD, MD, DCC or
DAT) or an analog source, the
recorder can start and stop
automatically. With digital
recording, there's no need to
worry about recording levels—
you'll get a perfect digital copy of
the original (if you want to change
the digital recording level, see
page 23).
If you are recording from a noisy
analog source, such as an old
recording, or from a source with
long quiet sections, the recorder
may not recognize the end of the
track. In this case, we
recommend using manual
recording (see page 22).
1 Load a CD-R or CD-RW
disc.
Check the display to make sure
that there's enough space on the
disc for what you want to record.
2 Press INPUT SELECTOR to
choose an input.
Pressing INPUT SELECTOR
repeatedly switches the active
input:
Analog - Optical - Coaxial
The recorder's display indicates
the current input.
3 Make sure that the source
is not playing, then press
SYNCHRO.
Press SYNCHRO repeatedly to
change the recoding mode, and
to select SYNC-1.
DIGITAL
REC LEVEL
ANALOG
REC LEVEL
MENU/
DELETE
TEXT
SYNCHRO
PROFESSIONAL
MONITOR
INPUT
SELECTOR
AUTO
MANUAL
TITLE/MODE
TRACK NO.
WRITE
DISPLAY
FINALIZEERASE
SCROLL
CD TEXT
1
2
36
SYNC–1
SYNC-1
SYNC–ALL
SYNC
SYNC–FINAL
SYNC
CD-R
CD-R
CD-R
O1 O1 OO:OO
FINALIZE
CD-R
1-track sync
All-track sync
All-track sync
w/ finalization
Record-pause
(no sync)
Synchro recording will not work if
the source is already playing!
The
SYNC-1 indicator will start to
blink when the recorder is ready.
SYNC-1
SYNC
-
1
CD-R
The display shows the 1-track
sync mode, with the
SYNC-1
indicator blinking to show that
recording can start.
4 Play the source.
The recorder starts recording
automatically.
5 The recorder pauses
recording after recording
one track.
If you're recording a CD or MD,
recording pauses automatically
when the track changes or there
is more than five seconds of
silence on the source.
If you're recording from DCC or
DAT tape, recording pauses when
the recorder encounters a new
start ID or there is more than five
seconds of silence on the source.
(See also
Digital recording from
DAT
on page 18.)
If you're recording from analog,
recording pauses automatically
when there is more than two
seconds of silence on the source.
6 If you're done, press
77
77
7 .
To record further tracks, simply
repeat steps 3 to 5.
After pressing 7, the display
shows
PMA REC while it records
the track information to the disc.
Note: If you find that synchro
recording does not seem to work,
see the troubleshooting section
on pages 40–42 for possible
remedies.
ENTER
CURSOR
MENU/
DELETE
TEXTMARK
SET
CLEAR
TITLE
/MODE
7
1
¡
8
3
4
¢
ABC DEF
GHI MNOJKL
PQRS TUV WXYZ
REC SYNCHRO
REPEAT RANDOM NAME CLIP
I
NPUT
SELECTER
FADER
SKIP PLAY
COMPACT DISC RECORDER
REMOTE CONTROL UNIT
SKIP ID
PROGRAM CHECK CLEAR
AUTO /
MANUAL
123
4
56
78
9
10/0 >10
SCROLL
DISPLAY
•
6
3
2
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HHB CDR-830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HHB CDR-830 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info