647373
19
Zoom out
Zoom in
Previous page
1/43
Next page
BOXER / MARLIN / FALCON / POLAR SERIES USER MANUAL
Version 06.03 DIG.EN 19
AUTOMATIC PROGRAMMING
A. Select the correct programme with the PROG 0-9 Key for setting function values. The
programme number is displayed on the small display.
B. Then press the REPROG key
to switch into programme mode.
The programme number now starts to blink on the small display.
C. VACUUM FUNCTION
Digital Time Control
Time is increasing. As soon as the vacuum meter gets to –1 press the STOP
VACUUM Key. The machine cycle automatically switches to the following
function.
Remark Digital Time Control
Let the vacuum function run 2 to 4 seconds longer after reaching –1 on the
vacuum meter so that “trapped air” in the packaging is also extracted.
Digital Sensor Control
The percentage vacuum increases. As soon as the value 99% is reached press
the STOP VACUUM Key. The machine cycle automatically switches to the
following function.
Remark
If full vacuum is not required press the STOP VACUUM Key when the required
value has been reached.
D. VACUUM PLUS FUNCTION (only with digital sensor control)
Digital Sensor Control
Time is increasing. Press the STOP VACUUM Key at the required time.
The machine cycle automatically switches to the following function.
Remarks
The VACUUM PLUS function can only be de-activated (OFF) by manual
programming. The VACUUM PLUS function will only run when VACUUM
function has been set at 99%.
E. GAS FLUSH FUNCTION (optional)
Digital Time Operation
Time is increasing. As soon as the vacuum meter gets to the required under-
pressure, press the STOP VACUUM Key. The machine cycle automatically
switches to the following function.
Digital Sensor Control
The percentage vacuum decreases. As soon as the required value is reached
press the STOP VACUUM Key. The machine cycle automatically switches to
the following function.
Remarks
The minimal under-pressure advised is 0.5 bar or 50% vacuum. The minimum
under pressure that can be set is 0.3 bar or 30%. GAS FLUSH function can
only be de-activated (OFF) by manual programming.
Starting situation: machine is in normal operating mode and the lid is open
Close the lid. The machine c
y
cle starts automaticall
y
.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Henkelman MARLIN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Henkelman MARLIN in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Henkelman MARLIN

Henkelman MARLIN User Manual - German - 44 pages

Henkelman MARLIN User Manual - Dutch - 43 pages

Henkelman MARLIN User Manual - French - 46 pages

Henkelman MARLIN User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info