647373
20
Zoom out
Zoom in
Previous page
1/43
Next page
BOXER / MARLIN / FALCON / POLAR SERIES USER MANUAL
Version 06.03 DIG.EN 20
F. SEAL FUNCTION
Can only be programmed manually. For automatic programming, the set time length will be run and the machine
cycle will automatically carry on with the next function.
G. SOFT AIR FUNCTION / STORE FUNCTION VALUES IN PROGRAM
Digital Time and Sensor Control
Time is increasing. As soon as the desired setting is reached press the STOP
VACUUM Key. After this operation the machine cycle ventilation
starts and the lid opens. The values are automatically stored and control panel
reverts automatically to the operation mode. The machine is ready for use.
Remarks
The soft air function can only be de-activated (OFF) with manual
programming.
SPECIAL REMARKS ON PROGRAMMING
For Digital Sensor Control
The value which is set for the gas flush function is the final vacuum percentage in the vacuum chamber after flushing
gas. For example, the vacuum function is set to 99% and gas flush function is set to 60%. This means that after the
vacuum function the chamber will be flushed with gas until there is 60% vacuum and 40% (actually 39%) gas in de
vacuum chamber.
For automatic programming,
Ensure that all functions are activated in the selected program. Activation means that the function in the program is
assigned a value. If the value is OFF then that means that the function is not activated and will not be included in the
automatic programming cycle.
For machines with optional gas flush function,
If a program is setup with the active gas flush function then this is indicated by a dot in the lower right hand corner of the
small display when selecting the program in the operation mode.
For machines with optional sensor control,
If a program is setup with the active VACUUM PLUS function then this is indicated by a dot in the lower right hand corner
of the large display when selecting the program in the operation mode.
If the function’s value is OFF then it can only be activated using manual programming.
Contact the supplier or Henkelman BV for more information about programming.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Henkelman MARLIN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Henkelman MARLIN in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Henkelman MARLIN

Henkelman MARLIN User Manual - German - 44 pages

Henkelman MARLIN User Manual - Dutch - 43 pages

Henkelman MARLIN User Manual - French - 46 pages

Henkelman MARLIN User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info