Manual Hendi 282007 (page 13 of 164) (English, German, Dutch, French, Italian, Polish)

741094

Zoom out

Zoom in

1/164

Check the integrity:

• of the ﬁxed protections,

• of the loading hopper,

• of the machine neck,

• of the machine body

All ﬁxed protections, etc.., must perform the function for

which have been foreseen.

Indicated parts sight check to verify their integrity in their

surface external part.

The parts must be however changed at the ﬁrst erosion

signals or breaking.

Check the functionality:

• of the control system parts / safety control;

• of the control devices.

All devices must perform the function for which have

been foreseen. Control directly the devices so that these

ones determine the waiting function.

The actuators and all parts must be however changed to

the ﬁrst erosion signals or breaking.

Check the absence:

• of strange noises after the starting

During the functionality checking of the control devices,

if there are strange noises, due for example to a seizing

or mechanical breaks, stop immediately the machine

and activate the maintenance service.

Check the absence:

• of oil trails both on the machine support ground both

in the Archimedean screw

Both during the working, both at the end of every work,

both in the assembly moment of the grinding group,

check the oil trails absence in the indicated parts. If

there are some ﬂuid drops stop immediately the

machine and activate the maintenance service.

For any intervention type or for the parts change

that are damaged, activate the maintenance ser-

vice. The possible change must happen with man-

ufacturer original products or at least of quality,

safety and equivalent characteristics. For analysis

contact the Authorized Assistance Center.

Put in function

The machine operator can put in function the ma-

chine following in order the under reported indica-

tions:

• Controls positive result for the preparation pre-

liminary operations,

• Controls positive result for the electric feeding,

• Controls positive for the hopper inserting and

positioning

• Checks positive result for the grinding group as-

sembly,

• Checks positive result for the Archimedean

screw correct rotation,

• Checks positive result / veriﬁcations before

starting and periodical,

• Finalized checks positive result and verify the all

safety conditions respect,

• Plug connection in opportune current socket,

• Place a gathering basin in the machine anterior

zone in correspondence of the ground meat exit

zone,

• Put in the machine left side and start the ma-

chine acting the control device of start “I”,

• Introduce manually the food product within the

machine neck and drive it towards the Archime-

dean screw using the pestle in equipment.

• At the end of the food product introduction, or

when from the drilled plate doesn’t come out

more the product, stop the machine acting the

control device of stop “0”.

It is recommended to make not work the machine

in vain, without the food product.

Switching off

In succession, the switching off must follow what

here under indicated:

• Before the switching off wait the food product

exile conclusion from the drilled plate,

• Stop the machine acting the control device of

stop “0”,

• Disconnect the machine plug from the feeding

socket,

• Perform the cleaning interventions

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 282007 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 282007 Manual

Product: