741094
12
Zoom out
Zoom in
Previous page
1/164
Next page
12
EN
3.7. Functioning description
The control devices are designed and manufac-
tured so as much sure and reliable and resistant
to the service normal stresses, to the foreseeable
strains and to the external agents. Besides they
are clearly visible, locatable and marked from a
suitable marking. Here follow the main control
devices are showed:
TYPE / COLOR REFERENCE / DESCRIPTION
button / black “0” / button for the machine stop control
button / white “I” / button for the machine start control
Starting
The machine starting is possible only with a vol-
untary action on the control device foreseen for
this aim: white button “I” for the machine starting
control.
Stop
For the stop control push the black button “0”. In
case of momentary or extended stop, before to get
in function the machine, all food products must be
removed within the machine: follow the indications
relative to the grinding group disassembly.
Functioning safety
If the machine is under stress, or is submitted to
too long functioning times or submitted at over-
loaded, the same stops immediately for the ther-
mal protection functioning. In this case wait that
it is completely cooled before proceeding to the
starting function.
Voltage lacking
In case of electric feeding breaking or if the ma-
chine is disconnected from the electric net, this
last one will be able to be restarted only following
the starting function, after the electric feeding
back or the reconnection to the electric net.
3.8. Controls and verifications before starting
VERIFICATION / CONTROL BEFORE THE STARTING MODALITY AND CHECKS
Check that:
Extraneous objects aren’t on the machine, inside the
hopper, inside the machine neck
Sight control of the indicated parts, to check of objects
or extraneous bodies lacking as for example different
tools, clothes, etc… and that there isn’t however the food
product.
In case of presence, provide with their removal.
Check the cleaning:
of the machine neck internal parts and of the
grinding group
of the pusher
of the machine external surface
All indicated parts surfaces, before the machine use
must be checked visually to verify their cleaning.
For the sight check of the grinding group internal parts,
provide with its disassembly.
In case of molds presence or other type of dirtiness, pro
-
vide with the cleaning procedure in accordance with the
chapter 5 indications
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 282007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 282007 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info